New custom build - won't load... phase leds...

[nismo9132]

Hi everyone,
I just finished my new system w/ the following specs:
Intel Core i7-2600K 3.3Ghz stock w/ 3.9 Ghz Turbo Boost
Gigabyte GA-Z68X-UD4-B3 Motherboard
8GB Corsair Vengeance DDR3 1600 RAM
GIGABYTE Super Overclock Series GeForce GTX 560 Ti (Fermi) 1GB 256-bit
Patriot Torqx 2 32GB SSD (for OS & Caching feature supported by Z68 chipset)
Western Digital Caviar Black 750GB SATA 6.0GB/s HDD
Rosewill 1000W Power Supply
Antec LanBoy Air Computer Case (Blue/Black)
Linksys Wireless N Dual-Band Wifi Adapter
LG Blu-Ray Burner Drive w/ Light Scribe Technology
Noctua NH-C14 CPU Cooler
Arctic Silver 5 Thermal Paste (for CPU)
Windows 7 Professional 64-bit

Unfortunately when I hit the power button, the psu kicks on, fans start, and cpu cooler spin, and a bunch of leds turn on.

So the LEDs that load are all green on my graphics card, but the PHASE LEDS on my Gigabyte motherboard display (from top to bottom) red, orange, yellow, yellow. i dont know what this means, but they stay on for a couple of seconds and then turn off while no video loads on my monitor. I'm not sure why this is happening but any help would be greatly appreciated!
Thanks in advance!
Mike

 

[nismo9132]

i figured it out.. i had 2 dvis plugged in and an hdmi and as soon as i reduced the grafix output to 1 dvi it started working.. that was after i popped my old xfx 7600gt in there and it loaded with a single dvi.
well at least now im running!

 

[compulsivebuilder]

Congratulations! I would not have guessed that.