Motherboard Debug Questions

[MichaelpJob]

Hello,
I have a Foxconn Flamingblade GTI 1366 Intel X58 motherboard.
I installed a new bios because I was having issues with bluescreen crashes, but because of this I crashed my computer.
I cleared by cmos and was able to start my computer, I also reset by optimized defaults. But I can not start my computer without clearing my cmos.
I'm not sure what I have to do to. Should I try to flash my bios?

Also if you need more details let me know and I will post them.

 

[MichaelpJob]

Also the error on my debug lcd is A1. I've been trying to troubleshoot but haven't had much luck finding anything I haven't already done.

 

[kopium]

Also the error on my debug lcd is A1. I've been trying to troubleshoot but haven't had much luck finding anything I haven't already done.

try putting out the battery to clear CMOS and when the the message that says that default loaded press del.In the bios press f7 to load optimized defaults and then f10 to save and exit.this should do the trick!

 

[PanosBucket]

I'd like to submit a question on that topic. I seem to have the exact same problem and although I did everything dear sir kopium suggested, I still can't solve my problem. PC still needs to have its CMOS reset and not enter the BIOS but press F1 to keep on with the windows boot. Can't I do something to fix that permanently? Also, when in BIOS's main screen, can you press F7 to load optimized defaults there and then F10 or you have to go deeper?