Will this ddr3 1600 work with my 1333 properly.

[hyeedo]

Will this
http://www.newegg.com/Product/Product.aspx?Item=N82E16820104203
dd3r 1600 pc1280 work with my current ram which is Patriot ddr3 1333 pc 10666 2x1GB, 1.5V cas 9-9-9-24?
Would I be able to run it in dual channel, if not would the performance drop any slower than the current setup?
I understand the new ram is cas 9 also, would it be able to run at the 1333 speed ?
I really like how it looks and seems like a bargain.
Or would I be better off getting a chip with a similar speed?
I usually just browse the web and play bad company 2 online. Im looking fore better system response and load up.
thanks

 

[Emperus]

What is your current system setup? That Kingston ram is rated at 1.65V. 1600 MHz modules do work with 1333 MHz ram's but the overall setup will run at 1333 MHz speed.

 

[hyeedo]

It wont be slower than 1333mhz right? And not dual channel right?

 

[henydiah]

fixed speed 1333, if you're confused about it, the better you're just using all of 1600 and it would be better, leave 1333, it all depends on the motherboard that you have. because if you add 1600 to the preformance max ram speed automatic will follow what already exists

 

[hyeedo]

Its a biostar TA 870+ motherboard.
I have 2 1gb patriot 1333, pc 10666- sticks. 9-9-9-24 Theres 4 slots total.
Would I be better off purchasing another set of pc 10666 or 10600, or would I be okay with the 1600 hyper blu. It seems to be cas 9 also. Would it run dual channel with my other sticks?

 

[henydiah]

i sugesst , buy same Speed and same JEDEC !

 

[deadllyshadow]

hi..

i'm also looking for this topic...i have already ocz 1600 pc3-12800 (1.7v)8-8-8...6GB...now i want to increase memory so i'm looking for g.skill sniper series bt with different volt..


i'm also in truble with this situation...

help me also...

 

[henydiah]

1600 pc3-12800 (1.7v)8-8-8...6GB...now I want to increase memory so i'm looking for g.skill sniper series bt with different volt

Hi .. Post your problem in new thread, you will get many answer and advise ..
Ddr3 standard 1.5v - 1.65v (under oc), and your post 1.7 it's too high and this situation get unstable (ram overheat)

 

[XeeshanRahat]

No, RAM PORTS Will Not Recognise Your 1600MHz RAM !, So Just Use 1066MHZ Or 1333MHz Ram !

 

[hyeedo]

I understand it wont work at 1600 when paired with the 1333, but will i be able to have dual channel at 1333, or would it work without problems?