My custom build computer beeps when turned on but does not show anyhthing on scr

I bought parts off of and I built the computer today... I do not have windows installed yet as I am getting it from a friend of mine. I plugged it into my screen and turned it on which it beeps, lights up turns on perfectly but does not show anything on screen, I was just wondering if that was bad? as I looked it up online and I could not find any info on this specifically.

RAIDMAX Altas ATX-295WB Black Steel / Plastic ATX Mid Tower Computer Case
Antec EarthWatts EA-650 GREEN 650W ATX12V v2.3 SLI Ready CrossFire Certified 80 PLUS BRONZE Certified Active PFC Power Supply
SAPPHIRE 100315L Radeon HD 6850 1GB 256-bit GDDR5 PCI Express 2.1 x16 HDCP Ready CrossFireX Support Video Card with Eyefinity
G.SKILL Ripjaws X Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL8D-4GBXM
ASUS DRW-24B1ST/BLK/B/AS Black SATA 24X DVD Burner - Bulk - OEM
MSI P67A-G43 (B3) LGA 1155 Intel P67 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
Seagate Barracuda ST3500413AS 500GB 7200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare DriveIntel Core i5-2500K Sandy Bridge 3.3GHz (3.7GHz Turbo Boost) LGA 1155 95W Quad-Core Desktop Processor BX80623I52500K
5 answers Last reply Best Answer
More about custom build computer beeps turned show anyhthing
  1. Welcome to Tom's Forum! :)

    RE: HD 6850 did you connect the 6-pin PCIe from the PSU?
  2. yes, I did... the fans on it are working so I think so! I just double checked to make sure and it is an 8 pin PCI Express connection...

    I do have to mention that I hooked up this computer to an old lcd screen that I have with the adaptor it
    came with!
  3. Best answer
    The MSI P67A-G43 (B3) has 2 PCIe slots; the top is the Default but if there's a problem you might want to try the 2nd {Blue} PCIe x8 slot. The DVI - VGA adapters work fine; never seen a bad one -- knock on wood -- yet.

    The next step is to eliminate a grounding issue - unscrew both the MOBO and PCIe screws and dangle the MOBO away from the standoffs and I/O shield and supported by a towel.

    IF you have an aftermarket HSF with a metal backplate then make certain there's no metal to MOBO contact.

    These steps may seem odd but they often are the culprit. The nest step is to pull the Headers - USB & Front with the exception of the 'Power' button -- you can even short that with a screwdriver of wire if needed.
  4. Hi guys,

    I hooked it up with an HDMI to my tv and it worked fine so it had to be the cable I used to hook up to the old monitor... I feel stupid. lol!

    Thank you
  5. Best answer selected by bradleyv1714.
Ask a new question

Read More

Motherboards Computer