Setting WiFi network across 3 floors with WAP4410N

[mgee_01]

hi all,

I am looking to setup a wifi network across 3 floors. I already have a WAP4410N on the 1st floor. I would like extend the range of coverage to the 2nd and 3rd floors.

Would like some advise on what the most economical options would be to provide the coverage across all 3 floors. Any input would be most appreciated.

Ideally I would like to use the current AP (WAP4410N) to mange & admin the entire wifi network. My thoughts on the setup are:

1st floor;
One WAP4410N and use 2 Cisco Aironet 1260 Series AP's to ensure the 1st floor is fully covered.

2nd floor;
One WAP4410N (connected to WAP4410N on 1st floor) and extend the range across the 2nd floor using 2 additional Cisco Aironet 1260 Series AP's connected to the 2nd floor WAP4410N to ensure the 2nd floor is fully covered.

3rd floor;
One WAP4410N (connected to WAP4410N on 2nd floor) and extend the range across the 3rd floor using 2 additional Cisco Aironet 1260 Series AP's connected to the 3rd floor WAP4410N to ensure the 3rd floor is fully covered.

Would this be technically feasible?

thanks in advance for all the replies.

 

[mgee_01]

update; this is not technically feasiable.