Sign in with
Sign up | Sign in
Your question

New build – Don’t boot need help please

Last response: in Systems
September 19, 2010 9:12:52 AM

I just built a brand new system with all brand new parts. After plugged all the parts in the system I was eager for the system to start for the first time. However, the system only shows up black screen and won’t even load into BIOS or start up. I checked monitor, video card, rams, and motherboard, but don’t seem to find any problems at all. I tried to switch with different video and still show the black screen. I even test the rams out by putting one in each slot at a time with no result. I am so desperate to get this computer up and running. Can anyone help me fix this problem? Thanks!

Asus P6X58D Premium
EVGA Geforce 470GTX
G.Skill Trident + Turbulence II 12GB F3-12800CL7T-12GBTDD
Crucial RealSSD C300 CTFDDAC256MAG-1G1 - 256GB
Western Digital Caviar Black WD1002FAEX 1TB SATA3
PSU – Corsair 850AX
Corsair Hydro H50
Lian Li Lancool PC-K62B
Scythe KM02-BK
LG Blu-Ray burner

More about : build dont boot

Best solution

September 19, 2010 2:23:30 PM

Do you have the 4/8 pin CPU power connected to the MB near the CPU?

Do you have a system speaker attached to the MB? if so do you get any beeps? if not take out all the RAM and see if you get beeps.

Do the fans spin when you power on the computer or lights?

September 19, 2010 8:19:19 PM

Problem solved! I appreciate for your help!
Related resources
September 19, 2010 8:20:12 PM

Best answer selected by Evolutiond13.
September 20, 2010 8:59:46 PM

What was it? the 4/8 pin?
September 22, 2010 2:21:16 AM

Yes, I am so noob haha.. Thank you for your help!