Sign in with
Sign up | Sign in
Your question

Vcore higher than rated maximum

Last response: in CPUs
Share
December 13, 2010 11:10:20 AM

Hello,
I ran sisoft sandra on my computer and its warning about my processor is: -
Warning W236 - Processor core voltage (Vcore) is
higher than rated maximum. Unless the reported
value is incorrect or the processor is a different
type that is not correctly detected, the voltage
is higher than it should be. If you’re over-clocking
the processor you may have pushed too far.

Over-clocking is a condition where the processor is
operating above its frequency specification (rated speed).
Sometimes the core voltage is increased to improve stability.

Fix: If the BIOS supports processor Vcore setting, check
that the voltage programmed is correct for the processor
installed. If not, check whether the mainboard supports
the installed processor.

Now, i want to know that how i can resolve this problem.

Processor: Core2Due 2.93 E7500
Motherboard: DG41RQ

Please Reply on do.not.post.your.email@yahoo.com

Mod edit:
Do not post your email or any other personally identifiab;le information in your posts please.
a c 159 à CPUs
December 13, 2010 11:18:18 AM

Check your motherboard bios for the voltage reading. Sandra may not be accurate for your particular motherboard. If you can't disable this reading, I would uninstall sandra and use coretemp. You really don't need to monitor anything but the cpu temp.
m
0
l
December 20, 2010 3:15:58 PM

o1die said:
Check your motherboard bios for the voltage reading. Sandra may not be accurate for your particular motherboard. If you can't disable this reading, I would uninstall sandra and use coretemp. You really don't need to monitor anything but the cpu temp.



Thanks 4 reply

You are absolutely right,

Regards!
KashiFarri
m
0
l
!