MoBo not recognuzing my HDD

[sicoticjoker]

Just built a new computer, and it wont recognize my HDD, but it recognized my SDD and Disk drive. Any suggestions on how to fix this?
Ive tried new cords,and different SATA ports.


Specs: Case:IN WIN GRone Gray 0.8mm SECC Steel ATX Full Tower Computer Case

CPU:Intel Core i7-3770 Ivy Bridge 3.4GHz (3.9GHz Turbo) LGA 1155 77W Quad-Core Desktop Processor Intel HD Graphics 4000 BX80637I73770

MotherBoard:ASUS P8Z77-V PRO LGA 1155 Intel Z77 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard

RAM:G.SKILL Ripjaws X Series 32GB (4 x 8GB) 240-Pin DDR3 SDRAM DDR3 1866 (PC3 14900) Desktop Memory Model F3-1866C10Q-32GXL

Graphics Card: EVGA 02G-P3-1568-KR GeForce GTX 560 Ti (Fermi) 2GB 256-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card

Power supply: Rosewill CAPSTONE Series CAPSTONE-750 750W Continuous @ 50°C, 80 PLUS GOLD Certified, Single +12V Rail, ATX12V v2.31 / EPS12V v2.92, SLI Ready, CrossFire Ready, Active - PFC Power Supply

SSD : OCZ Agility 4 AGT4-25SAT3-256G 2.5" 256GB SATA III MLC Internal Solid State Drive (SSD)

HDD : Western Digital WD Black WD1002FAEX 1TB 7200 RPM 64MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive

 

[Dereck47]

See if this helps:

1.) Disconnect all drives
2.) Remove battery from motherboard
3.) Clear motherboard's CMOS
4.) Re-insert battery
5.) Connect SSD to port SATA6G_1
6.) Connect HDD to port SATA3G_3
7.) Change SATA mode of ports SATA6G_1 & SATA3G_3 to AHCI mode
8.) Save BIOS settings
9.) Reboot into BIOS and see if HDD is now recognized

 

[sicoticjoker]

See if this helps:

1.) Disconnect all drives
2.) Remove battery from motherboard
3.) Clear motherboard's CMOS
4.) Re-insert battery
5.) Connect SSD to port SATA6G_1
6.) Connect HDD to port SATA3G_3
7.) Change SATA mode of ports SATA6G_1 & SATA3G_3 to AHCI mode
8.) Save BIOS settings
9.) Reboot into BIOS and see if HDD is now recognized

Thank you very much, i will try, and post results.

 

[japps2]

What OS are you running? Windows 7 or 8?