Will any graphics card fit into my board and case?

[logdirects181]

my motherboard:intel manufactured dg33fb which is an atx formfactor: http://www.intel.com/products/desktop/motherboards/dg33fb/dg33fb-overview.htm
my case is an atx case.......
so am i ready to go with any highest end card as they are quite large in size?????also i have enough psu for any card........
so am i ready to go???????

 

[Mousemonkey]

If you bump this thread after ten minutes it will be deleted as well.

 

[wa1]

If it's true your case is ATX type then you can use almost any graphic card...

 

[logdirects181]

If you bump this thread after ten minutes it will be deleted as well.

hey,i'm new on this site,who deleted my first thread???i can't understand and why?????

 

[Mousemonkey]

hey,i'm new on this site,who deleted my first thread???i can't understand and why?????

Being new is not an excuse for ignoring the rules, they are posted on every forum. Don't get upset if you fall foul of the rules that you choose to ignore.

 

[Mousemonkey]

Now now, no need for name calling.

 

[logdirects181]

i need more answers

 

[decode]

He is wise young one, Bow down to yoda(aka mousemonkey) ::Bows::

EDIT:

Hard, Provide full details of your computer set, or as much as possible in a neatly formated way(because were format nazis) and I will do my best to help you.

 

[Mousemonkey]

i need more answers

Why? wa1 has already given you the information you need, if you don't believe him then get a tape measure out and and check the dimensions of your case and the dimensions of the cards on the market to see if they will fit.

 

[logdirects181]

processor intel quad core q9400
4gb ram
intel dg33fb motherboard of atx formfactor
1300watt corsair psu
now please answer

 

[decode]

Yes, its most likely possible that it will fit, However to be sure I would like to know what graphics card you intended to buy, and the actual case model.

 

[logdirects181]

Yes, its most likely possible that it will fit, However to be sure I would like to know what graphics card you intended to buy, and the actual case model.

i want to buy a palit gts 250 or xfx 9800gt............
also i can't specify my case model no. but i'm pretty sure that it's a mid tower atx case and btw it's not a very popular company's case it's an mron case....have you heard it???

 

[decode]

I will guesstimate that it will fit, It's not exactly a huge card.

I say its pretty much all go ahead now, Also, Instead of a 250GTS I recommend a 5750 or 5770, They include modern features such as Eyefinity and Dx11. They come in at the same price as the 250 GTS in my country, however I'll check on newegg to see if they do in the states.

EDIT: According to newegg there cheaper than the 5750 in the states.

 

[wa1]

Even mid ATX tower are large enough for most of graphic card to get inside it...
What is your budget? Monitor resolution?
You must be a rich man, since you has 1300W Corsair PSU...

http://www.intel.com/products/desktop/motherboards/dg33fb/dg33fb-overview.htm
Is that your motherboard?

Since it has 1 pcie slot only then you must get a single powerful card, like HD5870 or even HD5970. Well, depends on what is your resolution and budget...

 

[logdirects181]

Best answer selected by harsh117711.

 

[Mousemonkey]

This topic has been closed by Mousemonkey