Sign in with
Sign up | Sign in
Your question

New build with a HAF X- Anything I should know?

Last response: in Components
Share
January 11, 2011 5:18:01 PM

So I have this new rig on the way, and just wanted to see if there was anything in particular I should know about a new build with a Cooler Master HAF X full tower case. As usual when building with a full tower, cable lengths can be a concern. It's like there is a disconnect with MB and PSU manufacturers or something, who often don't provide long enough cables for a full tower build. I am putting in an ASUS P8P67 Deluxe. For complete details on the build, click on my sig.

I would like to hear from people that either own or have owned and/or built with this case. I know about the optional fan, and I will probably have to order it, as they no longer appear to ship the second top fan- or it is a matter of luck. But any insight or "gotchas" is really what I want to know about. Thanks.

Here is a link to the case at Cooler Master:
http://www.coolermaster-usa.com/product.php?category_id...

More about : build haf

a c 91 ) Power supply
January 11, 2011 5:53:27 PM

If you keep it to a single card, a good 600+ watt PSU will be enough.. I'll recommend the Seasonic M12II 620 in that case as it has pretty long wires.. If you've SLI plans down the line then get the Corsair AX 850..
m
0
l
January 11, 2011 5:58:06 PM

Thanks but as stated, the parts in my build are ordered and on trucks already. This is not about what components to select, that is done. I am just looking for any particulars about building with this case.
m
0
l
Related resources
January 14, 2011 9:29:32 AM

I just put the same mb in HAF X case. Only had one big issue and that was my CM 212 baseplate doesnt fit into the cutout on the back of the case. Now i'm stuck. I just put the stock cooler on for now but cant decide what my best course of action is.... If you find a cooler that fits let me know lol.
m
0
l
a b ) Power supply
January 14, 2011 1:56:52 PM

You might already have your stuff and noticed that the HAF X comes with extensions for CPU power. All else should fit fine.
m
0
l
January 14, 2011 3:18:42 PM

hubbster said:
I just put the same mb in HAF X case. Only had one big issue and that was my CM 212 baseplate doesnt fit into the cutout on the back of the case. Now i'm stuck. I just put the stock cooler on for now but cant decide what my best course of action is.... If you find a cooler that fits let me know lol.


If that happens to me they will be the last Cooler Master products I will ever buy. There is no excuse for something as stupid as that. But that is exactly the kind of "gotcha" I posted this thread for, so I appreciate it. I am just hoping it is something you are overlooking, but that does not sound good at all.

I am already seriously pissed because UPS is STILL holding on to my entire shipment, and won't deliver cause my gravel drive has 1/2" of snow on it. But after hearing that, this is going to be a real bad day. :fou: 
m
0
l
a b ) Power supply
January 14, 2011 5:49:56 PM

I have the CM Storm Scout with a CM V8 cooler, same size cut-out and backplate. They don't line up perfectly centered, but had no issues with install. Straight on access to mounting hardware. As for UPS.....
m
0
l
January 14, 2011 6:19:37 PM

jockey said:
I have the CM Storm Scout with a CM V8 cooler, same size cut-out and backplate. They don't line up perfectly centered, but had no issues with install. Straight on access to mounting hardware. As for UPS.....


Thanks jockey. I figured it would probably be something along those lines. I was more worried that it wouldn't fit at all on a new build. I don't need access through the cutout, cause the cooler will be mounted before the board goes in. I just want to know there is no problem with that.
m
0
l
January 14, 2011 7:24:38 PM

I had also installed it before putting it in the case, but the metal bracket was making contact with the case. Im not sure if there was a slight clearance that just was not apparent until the screw were placed to hold the mb in. Why couldn't they make the cutout an inch bigger and elminate this problem. I guess my real question now is if its a problem for the metal backplate to be touching the case? IE I was woring about it actualy grounding my cpu to the case...... OK now you know I am a complete newb, but I have no idea
m
0
l
January 14, 2011 7:26:01 PM

Oh also you may have issues installing the second fan on top. I took out the USB cables etc and it still makes contact with all the other cables, not allowing you to puch the case top down. But all in all I love the case, just those two issues that were frustrating setbacks building the system
m
0
l
January 15, 2011 6:12:13 AM

212 in mounted now without difficulty and fan is in place (however I took out esata and usb 3.0. No issues.
m
0
l
January 16, 2011 1:42:35 AM

Well for me that was an enjoyable build on the HAF X. Clean, uncluttered, great cable management. And they even beveled the cable side of the case outward to allow for the cables. No problem with the cooler or back plate. The USB 3.0 issue- :sarcastic:  that's a loose end.

Posting on the little beast now. I'm thrilled how quiet it is. Amazing actually. Just got it built, so I'm off to install some more stuff. :bounce: 
m
0
l
a b ) Power supply
January 16, 2011 3:10:18 AM

I just popped one open for ya.
That case is so nice, my AMD blood might get one this year for a Sandybridge build!
Have fun, I mean more fun.
m
0
l
January 16, 2011 3:36:57 AM

jockey said:
I just popped one open for ya.
That case is so nice, my AMD blood might get one this year for a Sandybridge build!
Have fun, I mean more fun.


:wahoo: 

Thanks. Yeah this is nice. Like real nice. Nice to have all four case fans and cpu fan being tracked in the BIOS.

There is more about this system, the build, components, and now some light benchmarks on it in this thread:
http://www.tomshardware.com/forum/296722-28-2600k-build...
m
0
l
a b ) Power supply
January 16, 2011 5:00:33 AM

Impressive. I think this years' extra pennys might get this AMD fan parts for an Intel I7K build. I also like the fact that Intel is offering SLI and Xfire support with their new board chips. I've also already heard of i7 2500K's going over 4.5 ghz on air.
Those chips' OC ability might get more popular than Phenom II X2 BE's being potentially unlockable to x4's.
m
0
l
January 18, 2011 4:14:03 AM

hubbster said:
212 in mounted now without difficulty and fan is in place (however I took out esata and usb 3.0. No issues.


Can I convert USB 3.0 to USB 2.0 using the convertor with the second optional fan on the top?

Anand
m
0
l
January 31, 2011 10:03:24 PM

studioman22 said:
So I have this new rig on the way, and just wanted to see if there was anything in particular I should know about a new build with a Cooler Master HAF X full tower case.


You have probably received the case, and I hope it's gone well. However, this case has a statistically significant occurance of a really painful problem: it kills motherboards. I built a great system using this case (which, ultimately, is a great case and with a Cooler Master Silent Gold power supply has good cable length . . . but keep reading). The front panel i/o board has wires that protrude excessively far, plus those protruding wires are closely apposed to the wires to the Power/Reset/LED switches. In manufacturing assembly, the protruding wires can and sometimes do penetrate the insulation of the switch wires causing a terminal short to whatever subcircuit is thus affected, for me, this fried the USB and audio circuits of FOUR motherboards before i tracked the problem down. Fortunately, Newegg is awesome and RMAed all four MBs.

For anyone who has this board, getting to the i/o panel is easy (six tabs, lift off top). Check it and put some insualtion between the switches and the panel/board. A common insulator in electronics is simply cardboard, such as the backing of a notepad. I ground down the protruding wires with a Dremel for safety.

Cooler Master has great products. ***HOWEVER,*** if you have problems, then they bite. They ONLY have online chat tech support. They have no follow-through. For an objective opinion, the San Diego Better Business Bureau shows that they have *earned* an "F" rating.

m
0
l
a b ) Power supply
January 31, 2011 11:11:20 PM

nandu_n said:
Can I convert USB 3.0 to USB 2.0 using the convertor with the second optional fan on the top?

Anand



It comes with USB 2 cables to switch it out.
m
0
l
a c 134 ) Power supply
January 31, 2011 11:26:10 PM

jcliftonmeek said:
Cooler Master has great products. ***HOWEVER,*** if you have problems, then they bite. They ONLY have online chat tech support. They have no follow-through. For an objective opinion, the San Diego Better Business Bureau shows that they have *earned* an "F" rating.


Been there, done that .... that's one of the intangibles that doesn't get enough attention. One thing I love about Antec is they answer the telephone ... and you don't talk to a high school student w/ 1 week of TS training, you get an actual "computer geek" who not only will answer your questions and provide you w/ what you need but actually knows more than you do !

When I had 4 cases on new builds for my office that had USb 1.1 front panel ports, I called up about 3 weeks after USB 2 came out and asked if I could buy new front panel USB modules .... they sent 4 of em , no charge. When I had a fan fail 17 months after completing a build (5 months after warranty expired) they sent two fans for no charge, not even shipping.

When I needed help disabling the vari-speed and 3 speed switches so i could use MoBo fan speed control, they guided me through it "on the phone".
m
0
l
a b ) Power supply
February 1, 2011 2:00:11 AM

OP,
Tell me how good the case is :)  I just want a comparison to my HAF 932 which I heard was very similar. lol.
m
0
l
February 1, 2011 3:03:52 AM

jcliftonmeek said:
You have probably received the case, and I hope it's gone well. However, this case has a statistically significant occurance of a really painful problem: it kills motherboards. I built a great system using this case (which, ultimately, is a great case and with a Cooler Master Silent Gold power supply has good cable length . . . but keep reading). The front panel i/o board has wires that protrude excessively far, plus those protruding wires are closely apposed to the wires to the Power/Reset/LED switches. In manufacturing assembly, the protruding wires can and sometimes do penetrate the insulation of the switch wires causing a terminal short to whatever subcircuit is thus affected, for me, this fried the USB and audio circuits of FOUR motherboards before i tracked the problem down. Fortunately, Newegg is awesome and RMAed all four MBs.

For anyone who has this board, getting to the i/o panel is easy (six tabs, lift off top). Check it and put some insualtion between the switches and the panel/board. A common insulator in electronics is simply cardboard, such as the backing of a notepad. I ground down the protruding wires with a Dremel for safety.

Cooler Master has great products. ***HOWEVER,*** if you have problems, then they bite. They ONLY have online chat tech support. They have no follow-through. For an objective opinion, the San Diego Better Business Bureau shows that they have *earned* an "F" rating.


I had contacted cooler master india manager and they say that HAF X is completely safe. They do agree that HAF X had a problem with first lot of shipments but after that they have fixed the issue.
m
0
l
April 22, 2011 6:22:01 PM

There not MB Killers anymore just got one from newegg last month any that have been put out in 2011 have a little piece of plasic inbetween the sharp welds and the cables preventing it from shorting the firewire to the led.

if your still worried about it just dont plug the firewire cable into your MB. usb3.0 is better anyway
m
0
l
!