Windows 7 change ide to sata bd-rom

[wanttoburn]

Hello,trying to get full function from BD-Rom.
PNP Device ID shows IDE\CDROM How can I change this To SATA for Blu ray burn. Win 7 64bit

 

[Dereck47]

SATA ports can have 3 settings (modes): IDE, AHCI, & RAID.

All optical drives (CD, DVD, Blu-Ray) Read and Write at SATA 1 (1.5Gb/s) speeds.

So you will have the same performance if your BD drive is in IDE or AHCI mode.

So you can leave your BD drive in its current mode.

 

[wanttoburn]

thanks for reply Dereck47. I have two SATA drives both PNP device ID IDE\CDROM .DVDRW in loc 1 no problem it's not a Blu ray burner.loc 2 BD-Rom

missing the Blu Ray burning function,can burn any other disc type no problem. BD-R disc not recognized. I thought BD burning required SATA setting?
I've just started researching this,but I've read SATA setting required in a couple threads.

 

[Dereck47]

If you can burn any other type of disk then your problem has nothing to do with SATA settings; that is software and/or media type related.

Try another brand of BD-R disk.

 

[Dark Lord of Tech]

Hello,trying to get full function from BD-Rom. < A rom reads,but doesn't burn
blurays

BD-ROM can only read audio and video information,not burn it.

http://www.newegg.com/Blu-Ray-Burners/SubCategory/ID-600 < you will need a bluray burner to burn BDR discs