Sign in with
Sign up | Sign in
Your question
Solved

Need cable sleeve for hdd led and power button wires

Last response: in Components
Share
January 15, 2011 8:20:23 AM

The USB cord is black, sata cord is black, going to get another black sata cable, then all I will need to do is the hdd activity led wire, which you can see

Any suggestions on this?

I was thinking shrink tube/wrap and some 1/8 cable sleeve, but I've never done this before

Pay no attention to the power supply wires, I'm getting a modular power supply soon.



Best solution

a b ) Power supply
January 15, 2011 9:50:30 AM
Share
a b ) Power supply
January 15, 2011 3:43:14 PM

Radio Shack
m
0
l
Related resources
January 15, 2011 5:05:36 PM

Best answer selected by scarslilpyro.
m
0
l
a b ) Power supply
January 15, 2011 7:44:01 PM

You can cut the existing case wires close to the front panel and also cut off the male connectors of those wires above and connect the two.
m
0
l
January 15, 2011 11:12:45 PM

mosox said:
You can cut the existing case wires close to the front panel and also cut off the male connectors of those wires above and connect the two.


With splices/posi-locks/soldering?

I would rather just take the front panel apart and hook it up the right way.

m
0
l
!