HP G60 DEAD

[harleyski]

[I HOPE I CAN GET SOME HELP WITH THIS PROB., THANK -YOU FOR THE EXCELLENT INFO....L HAVE HP G60-231WM LAPTOP HARDWARE 1)BOARD 2)CONNECTORS-POWER JACK,KEYPAD, USB, TOUCH PAD, SUSPECT ON/OFF/WLAN BUTTON BOARD (WHICH I HAVE SCHEMATICS BUT NO VOLTAGES) ALL BUT PW JACK ARE FFC TO ZIF....CD HD DRIVES, MEMORY, WLAN CARDS SCREEN -ALL EXCLUDING THE HD ARE 100%TRUSTED, COULD A VIRUS CASE SUCH A CONDITION? HD. SO OPTIONS ARE LIMITED I UNDESTOOD THE BASIC INFO BUT AM HAVING TROUBLE APPLYING IT TO A REAL SIMPLE 5 COMPONENT SYSTEM......B4 I ORDER NEW MB I'D LIKE TO BE SURE THE ON/OFF/WLAN BUTTON BOARD IS GOOD...GOT TPS NO VOLTAGES DON'T WANT TO FRY ANOTHER BOARD WHILE USING CONTINUITY VOLTAGES??? OR???? CAN I USE TO BE SURE THE SWITCH IS WORKING IT'S A SMALL BOARD WITH THE ON/FF/WLAN BUTTON....SO DO I ORDER A NEW MB...I'M I MISSING ANYTHING? THERE ID ONLY THE POWER JACK LED ON NOYHING ELSE HELLLLLLLLLLLLP I DO SEE THAT A ON TOGGLE WAKES UP BM IN THE ON/OFF/WLAN/ BUTTON BOARD IO SCEMATIC --BE A SHAME TO HAVE AGOOD MB THAT'S NOT BEING WOKEN.......

 

[plasmastorm]

Turn off caps-lock, re-type the entire post so it makes some sense then maybe we can help.

 

[harleyski]

Turn off caps-lock, re-type the entire post so it makes some sense then maybe we can help.

g60-231wm laptop has only power jack light on...followed no boot instuctions-no luck... want to determine if on/ff/wlan button board is working or if mb is bad. thank -you. why were caps a problem?

 

[stopDropAndRoll]

Just encountered this problem. HP G60-535DX would not power on, but the power jack light was on. Putting it here in case anyone else has the same problem.

This worked for me:
- Disconnect the power supply
- Remove the battery
- Press the power button for 20 seconds to drain any residual power.
- Reattach the battery
- Plug the power supply in
- Press the power button

CAPS LOCKS ARE HARD TO READ - IS THE ONLINE EQUIVALENT OF SHOUTING - AND IS CONSIDER JUST PLAIN RUDE ESPECIALLY WHEN YOU ARE ASKING FOR HELP.

I'd previously re-seated the memory - not sure if that had anything to do with the problem. If above doesn't work, re-seat the memory and repeat above.

 

[cwestn]

Do you happen to still have the schematics for the G60?