Another Push/Pull Question

[Ebtoulson]

Ok so I just bought a thermaltake spedo advanced package case along with a h70 cpu cooler. I was wondering if someone could help me with the optimal fan push/pull setup. I had all of the fans in their default position but when I installed the h70 it recommended setting the rad to intake which removed 2 of the exhaust fans. Im including a picture of how it is setup now.

1. 120mm above rad
2. 230mm exhaust
3. 120mm (not installed)
4. 140mm intake
5. 120mm behind motherboard intake (skeptical if theses even does anything)
6. 120mm adjustable (probably going to move it to blow on video card)
7. 230mm side panel intake
h70 - 2 x 120mm intake

thanks

edit: I forgot to mention that the case has compartments to separate the psu, video card, and cpu.

 

[Deleted member 362816]

have the h70 push pull con fig push out of the case not bring air into. it will not run that much hotter

I did it like that in my Thermaltake element v case worked great.

 

[Ebtoulson]

Best answer selected by Ebtoulson.

 

[Deleted member 362816]

That is a very good case you have love how it separates the components

 

[Ebtoulson]

yea its pretty nice.
edit: was sleep deprived and wasnt thinking correctly