I just finished my system but not too sure of my motherboard.. Tags: Corsair Memory Product Last response: September 23, 2011 10:26 PM in Memory Share slam016 September 23, 2011 10:07:32 PM How do these spec's look? Configuration •CPU: Intel® Core™ i7-2600K 3.40 GHz 8M Intel Smart Cache LGA1155 (All Venom OC Certified) •HDD: 2TB (2TBx1) SATA-III 6.0Gb/s 64MB Cache 7200RPM HDD [-64] (Single Hard Drive) •MEMORY: 16GB (4GBx4) DDR3/1600MHz Dual Channel Memory Module [+145] (Corsair or Major Brand) •MOTHERBOARD: * [CrossFireX/SLI] GigaByte GA-Z68A-D3H-B3 Intel Z68 Chipset DDR3 ATX MB w/ Lucid Virtu + Intel Smart Response Technology & 7.1 Dolby Home Theater Audio, GbLAN, USB3.0, 2x SATA-III RAID, 2 Gen2 PCIe, 3 PCIe X1 & 2 PCI (All Venom OC Certified) [+23] •SOUND: HIGH DEFINITION ON-BOARD 7.1 AUDIO •VIDEO: NVIDIA GeForce GTX 580 3GB 16X PCIe Video Card [+127] (Major Brand Powered by NVIDIA) going too sli one more Nvidia geforce gtx 580 3gb at the end of the month More about : finished system motherboard geekapproved a b } Memory September 23, 2011 10:22:25 PM Looks ok. Make sure that is 1.5v ram, not 1.65v. I'd recommend this board. Also if the computer is mainly for gaming, the 2500K is just as good as the 2600K and $100 less. Games do not use hyperthreading. http://www.newegg.com/Product/Product.aspx?Item=N82E168... m 0 l slam016 September 23, 2011 10:26:34 PM geekapproved said:Looks ok. Make sure that is 1.5v ram, not 1.65v. I'd recommend this board. Also if the computer is mainly for gaming, the 2500K is just as good as the 2600K and $100 less. Games do not use hyperthreading. http://www.newegg.com/Product/Product.aspx?Item=N82E168... Ok thank you also should I get a ssd? I was reading that it only effects load times? m 0 l Can't find your answer ? Ask ! Publish Related resources Just finished my system build. Forum Just finished building system, have to remove and reinstall RAM every time I turn it on? Forum SolvedJust Finished Building My PC, Experiencing motherboard and GPU problem Forum SolvedI just want to be dead sure of how this connects to my motherboard Forum SolvedSystem won't post, think i found the problem just want to be sure Forum I just finished putting my new system together and i booted it up at its stuck on the boot screen! Forum How are these benchmarks looking? Just making sure its not too hot. Forum Just finished building my first system - having a memory issue. Forum Building system, just want to make sure all is well with it really Forum Just finished system - started fine then lost power Forum Just Finished First Homebuild System. First Boot UP = Blank Screen. Forum Just finished my system build but nothing shows up on monitor?!?!? Forum New system, not sure what i should push too Forum Is a 7950 too good for my system (Will It just get bottlenecked?) Forum Motherboard drivers only support Win7/Win8 but want to install WinXP on my system - How? (No virtual machine, too slow!) Forum Just finishing off my system Forum Should I buy a new motherboard to replace my burnt to remove my bottle necked system out one or just upgrade completley? Forum Just put together new system - is non-AHCI motherboard holding me back Forum Bad Motherboard? System Just shut off and now no Power. Forum More resources Read discussions in other Memory categories Compatibility DDR2 DDR3 Dual Channel RAM Corsair G.SKILL !