Need a fan that will work

[lynmachine]

ok i have an acer aspire x1200 and im doing a few mods one of my mods are going to be taking off the stock cpu heatsink fan not the heatsink but just the fan and replacing it with a blue led fan

problem not shore what size it is and also most fans i have seen have the screw holes set up for it to be put on the case not the cpu

it has a 4 pin power clip and the 4 screw holes are not alliend like the case fans would be plz help here is a pic of the fan and heatsink
http://www.google.ca/imgres?imgurl=http://www.it.com.cn/desktop/image/2009/03/31/16/0320_pc_review_acerX1200_17m.jpg&imgrefurl=http://www.dacheng.com.cn/NewsFolder%255C20099%255C2009925145245746.html&usg=__FeAgbM7ITpYdMyt2ZFnUoYy14hM=&h=333&w=500&sz=93&hl=en&start=88&zoom=1&tbnid=YrL45WdEiDN0IM:&tbnh=154&tbnw=217&ei=GENETfPuCJL2gAe2ka23AQ&prev=/images%3Fq%3Dacer%2Bx1200%26um%3D1%26hl%3Den%26sa%3DN%26biw%3D1579%26bih%3D651%26tbs%3Disch:1&um=1&itbs=1&iact=rc&dur=89&oei=CENETbG_D8X6lwfL_PD-Dw&esq=5&page=5&ndsp=22&ved=1t:429,r:12,s:88&tx=129&ty=94

every pic of one that page is exacly what my pc looks like plz help ty
Lynmachine

 

[lynmachine]

or if i have to i can switch out the heatsink with one that will work and fit remember it is a slim lowprofile compiter it will need to fit

dementions
the case on the out side is only 4" wide
the heatsink is only 2 1/2 " tall from cpu plate to top of fan
fan size 3 3/4" from outside rim to out side rim

 

[lynmachine]

i beleve is is an 80 mm fan so that is the size i can get a hole new heatsink but it hase to be lowprofile and be led blue i have been looking all day now plz help

 

[beanoslim]

The Antec at the tops nice.
http://www.mwave.com.au/search.asp?CartID=mAU@2XB8O3KFDKV6LDJZVLM8MQVOBHHGJZ49U33EHIDT4YOCER&search=80mm blue led&page=1

Don't think you'll get a low profile with blue fan, this is the low profile I would recommend.
You can get a 92 or1 00mm blue fan for it I suppose.
http://www.mwave.com.au/sku-18020494-Scythe_100mm_Shuriken_Rev_B_3_Heat_Pipes_CPU_Cooler_for_Intel_amp_AMD_Processors

Or this if it'll fit, same height and very easy to pick up a nice blue 120mm fan.
http://www.mwave.com.au/sku-18020497-Scythe_Big_Shuriken_120mm_CPU_Cooler_(SCBSK-1000)

 

[kilo_17]

Hey lynmachine did you get that cable I posted the link for last night?

 

[lynmachine]

anyone ready to order the part need to get it to have all the parts ready to go plz rpy with anything you might think will work or help ty
Lynmachine

 

[lynmachine]

The Antec at the tops nice.
http://www.mwave.com.au/search.asp?CartID=mAU@2XB8O3KFDKV6LDJZVLM8MQVOBHHGJZ49U33EHIDT4YOCER&search=80mm blue led&page=1

Don't think you'll get a low profile with blue fan, this is the low profile I would recommend.
You can get a 92 or1 00mm blue fan for it I suppose.
http://www.mwave.com.au/sku-18020494-Scythe_100mm_Shuriken_Rev_B_3_Heat_Pipes_CPU_Cooler_for_Intel_amp_AMD_Processors

Or this if it'll fit, same height and very easy to pick up a nice blue 120mm fan.
http://www.mwave.com.au/sku-18020497-Scythe_Big_Shuriken_120mm_CPU_Cooler_(SCBSK-1000)

the cpu heat sink is shown in pic i will need one like it not taking the mobo out to change the backplate so this wont work but ty for your input i need a heatsink with the screw down type mounting like in my pic
ty again
Lynmachine

 

[lynmachine]

Hey lynmachine did you get that cable I posted the link for last night?

ya man ty i was looking for it every where and i could not find it i bought it and its on the way to my house ty once again u saved me and i gave you the 40 points for the best awnser ty agan man

 

[kilo_17]

Yeah thanks for the 40 points! Anyway is that using the regular AM3 mounting bracket or a proprietary one? I couldn't tell