Antec 300 case and seasonic power supply?

Status
Not open for further replies.

methodius1978

Distinguished
Feb 5, 2011
6
0
18,510
Hello,
I was looking at getting an antec 300 case and a power supply, but all the power supplies i see have a fan on top and the PS mounts on the bottom of the case, wouldn't this blow hot air into the case?

Just looking for a case with no windows on it no lights and shiny things, hopefully (3) 5 1/4 drive bays 2 would be ideal sturdy case for an AMD build and a power supply. Anything would be helpful

Thanks!
 
Solution
The Antec Neo 620 mounts the right way but I also remeber that it only really mattered which way the fan was facing when I was running SLI for single config it doesn't matter. So if you have no plans for crossfire I would not worry about which way it faces.

Also alll Antec TP series will mount with the fan facing down.

methodius1978

Distinguished
Feb 5, 2011
6
0
18,510
Looking to build this

AMD Phenom II X6 1090T Black Edition Thuban 3.2GHz Socket AM3 125W Six-Core

ASRock 870 EXTREME3 AM3 AMD 870 SATA 6Gb/s USB 3.0 ATX AMD Motherboard

Western Digital Caviar Black WD5002AALX 500GB 7200 RPM SATA 6.0Gb/s 3.5" Internal

Crucial RealSSD C300 CTFDDAC064MAG-1G1 2.5" 64GB SATA III MLC Internal Solid State Drive (SSD

G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model F3-10666CL9D-8GBRL

SeaSonic S12II 620 Bronze 620W ATX12V V2.3 / EPS 12V V2.91 80 PLUS BRONZE Certified Active PFC Power Supply

XFX HD-685X-ZDFC Radeon HD 6850 1GB 256-bit DDR5 PCI Express 2.1 x16 HDCP Ready CrossFireX Support Video Card with Eyefinity

Antec Three Hundred Black Steel ATX Mid Tower Computer Case

total cost is $900 with shipping and then 40 in rebates so under 860
 


that one will be fine from an airflw point of view, they all will be, psu fans suck from inside the case and blow to the outside, doesnot matter if it is upside down or not.
 
The Antec Neo 620 mounts the right way but I also remeber that it only really mattered which way the fan was facing when I was running SLI for single config it doesn't matter. So if you have no plans for crossfire I would not worry about which way it faces.

Also alll Antec TP series will mount with the fan facing down.
 
Solution
Status
Not open for further replies.