maxpayne_88

Distinguished
May 18, 2010
37
0
18,530
HI, i am planning on upgrading my graphic card to HIS H467QR1GH Radeon HD 4670 1GB 128-bit DDR3 PCI Express 2.0 x16 HDCP Ready CrossFireX Support Video Card. will that graphic card work with my dell dimension e510? I currently have 305watts psu. i am not planning on upgrading the power supply any time soon, so can someone help me figure out if that card will work with my dell dimension e510. if not can someone recommend a graphic card that will work for my dell dimension e510 for gaming
 
314298032440internal4.gif


Well, the card position is faced up and only accept card with 1 bracket instead of 2, so this card should work for you:
http://www.newegg.com/Product/Product.aspx?Item=N82E16814150467

That card is only take 1 slot and better than HD4670. Yes, 305W is enough to run that card. :)
 

maxpayne_88

Distinguished
May 18, 2010
37
0
18,530
which sould i get PowerColor AX4670 1GBK3-PH Radeon HD 4670 1GB 128-bit DDR3 PCI Express 2.0 x16 HDCP Ready Video Card or XFX HD-567X-ZNF3 Radeon HD 5670 1GB 128-bit DDR5 PCI Express 2.0 x16 HDCP Ready CrossFireX Support Video Card
 

maxpayne_88

Distinguished
May 18, 2010
37
0
18,530
i think i am go with the AX4670 1GBK3-PH Radeon HD 4670 1GB 128-bit DDR3 PCI Express 2.0 x16 HDCP Ready Video Card is cheaper and it has some great reviews. hopefully it end being a good gaming card
 

maxpayne_88

Distinguished
May 18, 2010
37
0
18,530
Hey guys beside the graphic card, i am trying to upgrade my hard drive for dell deminsion e510. Can somone recommend a hard drive tht will work with my system. I am looking for something with 500gb+. i would go to dell website and ask them, but i dont really trust them.
 

maxpayne_88

Distinguished
May 18, 2010
37
0
18,530
I AM LOOKING AT Rosewill 3.28 ft. eSATA to SATA Black Flat Cable Support 6 Gbps, 3 Gbps, and 1.5 Gbps transfer rate Model RC-3.28-SATA-MM-BK WILL THT FIT WITH SAMSUNG Spinpoint F3 HD502HJ 500GB 7200 RPM 16MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive
 
No.

That's a 3'+ eSATA to SATA cable. One end would plug into a eSATA (external SATA) connector on your case, the other end into an HD outside the case.

Choose a SATA cable from one of these:

http://www.newegg.com/Product/Produ...on=sata cable&bop=And&Order=PRICE&PageSize=20

Low price, matching color, straight connector, or 90 degree connector . . . decide which kind will work best in your build.

Cheapest one (black Rosewill, straight connectors) is this one:

http://www.newegg.com/Product/Produ...19230&cm_re=sata_cable-_-12-119-230-_-Product

because the shipping is only $2.
 

maxpayne_88

Distinguished
May 18, 2010
37
0
18,530
ok so i decided to go with SAMSUNG Spinpoint F3 HD502HJ 500GB 7200 RPM 16MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive and Rosewill 18" Serial ATA Black Flat Cable w/ Locking Latch Support 6 Gbps, 3 Gbps, and 1.5 Gbps transfer rate Model RC-18"-SA2-BK.thank for all ur help.this ia great website for help:))
 

maxpayne_88

Distinguished
May 18, 2010
37
0
18,530
ok i installed the SAMSUNG Spinpoint F3 HD502HJ 500GB 7200 RPM 16MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive and i enable the this hard drive in the bios and when window started it said new hardware found and it installed by it self but when i when into control panel >system and performance> and click rearrange item of har disk to run faster to see if the new hard drive is there it not it only shows y previous hard drive that came with the pc. help me someone
 

maxpayne_88

Distinguished
May 18, 2010
37
0
18,530
ok so iinstalled the new harddrive and went to my computer>manage>diskmanagement>and click format and i formated for me is their anything else i need to do before i set program files in my new harddrive?