Sign in with
Sign up | Sign in
Your question

New Home Build problem

Last response: in Systems
Share
November 17, 2010 9:11:46 AM

Guys i'm doing my first home build so i was bound to make mistakes but i'm afraid of damaging anything.
I installed everything and powerer on, what i got was the leds for cpu usage were all on and the beeper was buzzing continuously.
What did i do wrong?
Plz help out because i am worried.

More about : home build problem

November 17, 2010 10:01:07 AM

go over all the power connections and make sure that everything is inserted correctly...
November 17, 2010 10:55:33 AM

i read in the mobo's manual that these repeated long beeps mean wrong installation of the graphics card but i think i installed the right way...
any tips?
Related resources
November 17, 2010 3:07:25 PM

any1 know a way to check if my gpu is damaged or something?
a b B Homebuilt system
November 17, 2010 7:09:11 PM

does the system boot with the video card out, and also make sure that the video card is inserted all the way, and for higher end cards, make sure it has power connected to it.
November 18, 2010 8:21:01 AM

r u sure u bought a big enough PSU?
November 18, 2010 9:50:06 AM

System specs:
Coolermaster Haf 922
i5-760 2.8Ghz(soon to be overclocked)
Corsair Xms3-1600 4gb
Gigabyte Ga-P55-Usb3
Ati Hd 3850 256mb(to be changed)
WD & Seagate 500gb hdds
Corsair Tx-750 PSU
November 18, 2010 12:37:54 PM

Could it be a mobo problem? because the gpu i'm using worked with no problems on my old pc(although there is the possibility of it being damaged some way/static electricity from when i had her in my hands or damage during traveling)
i would buy new gpu when Christmas came for a better price(i really want that hd 6870) so i prefer to w8 a bit more
thnx for all the help
a b B Homebuilt system
November 18, 2010 3:51:52 PM

does your motherboard have an onboard video card. If it does, try just using that and see if it boots.
November 18, 2010 5:25:45 PM

no it's a p55 mobo unfortunately
a b B Homebuilt system
November 18, 2010 6:11:42 PM

dang, thats going to be a hard one to figure out, you might have to get another video card just to try it out. If it still doesnt work, then I might say its your mobo.
November 19, 2010 5:50:34 AM

thnx gys
November 19, 2010 3:58:54 PM

i ordered an 8400gs which was the cheapest i could find to do the testing(it is about the same price as taking the system to a store for them to test it). If it works it means that my 3850 R.I.P.
I'd like to make another question i'm planning on doing some overclocking but not crazy stuff and i'm hearing that the CM 212+ is really good option, but i found a Xigmatek Gaia available at the shop near me at almost the same price and i can't find any reviews for it except for which states that it beats the CM. Plz guide me and if i should repost in another forum also tell me.
November 21, 2010 3:07:56 AM

Take a look at this:



Iv herd sm good things bout this cooler so I'd go for it
November 21, 2010 9:51:05 AM

I know it's really good cooler for the price.
Say i installed it, how high can i expect to overclock but still be in safe temps?
November 23, 2010 11:20:13 AM

Change of question.
I used new ram modules and the computer boots all the way in ubuntu from usb, but the beeper keeps buzzing without pauses.
What does this mean?
Revove from the list of quoted messages Add to the list of quoted messages Quick edit Edit this message
November 23, 2010 1:48:51 PM

someone plz delete this
sry for posting again
!