Archived from groups: comp.sys.laptops (More info?)
I blew it.. and I know it...
I accidently (not by choice, but because the video was hosed up)
unplugged the power to my Toshiba 3005 while the BIOS was being
reflashed (couldn't tell since the screen wasn't displaying properly,
but I did hear the floppy drive reading my BIOS update disk). Yes,
the eternal sin was performed by me and I've wiped my first BIOS
ever... but there is a light at the end of the tunnel! My local Toshiba
repair center said they could recover it in 1 hour for only $100.00!!!
Then I thought.. One hour recovery? Doesn't sound like they desolder
the FLASH and replace it... so I'm thinking that there is a backup BIOS
of some sort. Something the machine can limp on in a worse case
scenario so that a new FLASH can be reinstalled. Perhaps a combination
of keypresses during power up, or a jumper to short. I would REALLY
appreciate any and all help in this matter! I like a good challenge
before
I give up my $100.00..
Archived from groups: comp.sys.laptops (More info?)
Michael Bender wrote:
> I blew it.. and I know it...
>
> I accidently (not by choice, but because the video was hosed up)
> unplugged the power to my Toshiba 3005 while the BIOS was being
> reflashed (couldn't tell since the screen wasn't displaying properly,
> but I did hear the floppy drive reading my BIOS update disk). Yes,
> the eternal sin was performed by me and I've wiped my first BIOS
> ever... but there is a light at the end of the tunnel! My local
> Toshiba repair center said they could recover it in 1 hour for only
> $100.00!!!
>
> Then I thought.. One hour recovery? Doesn't sound like they desolder
> the FLASH and replace it... so I'm thinking that there is a backup
> BIOS of some sort. Something the machine can limp on in a worse case
> scenario so that a new FLASH can be reinstalled. Perhaps a combination
> of keypresses during power up, or a jumper to short. I would REALLY
> appreciate any and all help in this matter! I like a good challenge
> before
> I give up my $100.00..
>
> Thanks,
> Michael
Pony up the dough. The service center has an eeprom writer, possibly
clipping directly to the chip or perhaps via contact points on the
mainboard.
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.