Sign in with
Sign up | Sign in
Your question

Failed to post after building a computer

Last response: in Systems
Share
December 5, 2010 12:21:45 AM

AMD PHENOM II X2 555 BLACK EDITION

ASUS M4A87TD/USB3 AM3 AMD 870 SATA 6Gb/s USB 3.0 AMD Motherboard

HIS RADEON HD 5770 128-BIT 1GB JUNIPER XT

G-SKILL 4GB (2X2) 1600 (12800 PC3) RAM

CORSAIR VX550W

ASUS DRW-24B1ST/BLK/B/AS Black SATA 24X DVD Burner - Bulk - OEM

WD 500GB Caviar Blue WD5000AAKS (SATA2/7200/16M)

Antec 300 Mid ATX

SAMSUNG EX2220X 21.5" WIDESCREEN LED MONITOR

I recently built a computer with parts that i ordered through online by myself. i had no problem building the computer but when it was time to connect the computer to the monitor and turn on the power, a problem emerged. everything inside the computer seemed to be running good: case fans, odd, hdd, power supply, and graphics card fan...but the monitor could not display, only showing 'no signal.' i made sure every connectors are in right position, disconnect everything and put'em back together again, press on memok! button, etc but nothing.

when i press power button, i see everything running, but i hear no beep sound. i thought the rams were defective but i don't see the dram led red light on the mobo.

what possibly could be the problem/solution for this matter?
could it be compatibility issue?
December 5, 2010 3:01:56 AM

Welcome to the forums, Newcomer. Have you worked through our standard troubleshooting guide/checklist yet? If you haven't, take a moment to do so. This guide was made to address the most common problems with "no boot" and/or "no display" issues.
m
1
l
!