Asrock P67 extreme4 Gen3 error code 45

Hi everyone,

I just put together a new build. Core i7 2600k, Asrock P67 Extreme4 Gen3 motherboard, and 4x4gb Gskill RipjawsX memory (ddr3-1600, F3-12800CL8D-8GBXM, XMP CL8-8-8-24 1.5v)

I'm getting the dreaded error code 45 on Dr. debug when all four sticks of RAM are loaded in. Monitor also won't turn on.

BUT, If I put any of the two sticks in slot B1 and B2 (two slots furthest from CPU) then the BIOS loads, video card works, monitor works, and I can get into the asrock uefi setup utility. It seems like slots A1 and A2 are faulty...any combination of RAM sticks in those slots will bring up the code 45 error.

First time builder so any tips would be appreciated. I even tore everything apart to check if there were any bent CPU pins..seems like everything is ok. Is there something else i can do? Maybe tweak some bios settings? I really don't want to RMA but after reading a lot of posts, it seems like i may have to!

Thanks!!!
1 answer Last reply
More about asrock extreme4 gen3 error code
  1. Just to clarify, when I use slot B1/B2 My comp boots up but only posts 8gb of single channel memory. Anything in A1 or A2 causes the error code 45. I bought this mobo from NewEgg...do I RMA through them or as rock?
Ask a new question

Read More

Memory ASrock