Hello, I bought the following ram although when I install the ram on it's own with no other RAM in the PC I keep getting the BLOD with different errors mainly PF out of range (can't remember exact error my own fault have left this RAM now sitting for 4 months as couldnt be bothered trying to figure out what was wrong!!!). I had previously run Memtest which found no errors in the RAM. The memory was the following OCZ Gold 4GB (2x2GB) DDR3 PC3-10666C9 1333MHz Low-Voltage Dual Channel Kit (OCZ3G1333LV4GK) [OCZ3G1333LV4GK]
My M/Board is the following. ASUS M4A88T-M with the following processor AMD Athlon 11 x3 445
G.Card NVIDEA G-Force GTS 450 1024mb
Forgot to add running Win7 Ultimate
More aboutmemory issue
It is windows 7 64 or 32 bits?
The bits has nothing to do with a BSOD.
Check your bios to make sure the dimms are set to the correct voltage. The dimm voltage is listed on a little sticker on the dimms themselves.
IME Asus mobos are very RAM sensitive. You might also want to e-mail Asus and OCZ to see if there have been issues with this specific model RAM in that specific model mobo.