Biostar TZ68A+

[clubplug]

Hello, our question is can the motherboard TZ68A+ handle two monitors connected to the onboard display connectors or do we need to install another display adapter to run 2 displays? The TZ68A+ has an onboard VGA, DVI and HDMI. Can we connect one monitor to the VGA and the other to the DVI?

 

[o1die]

You should be able to use a vga cable splitter. Cable club had some for about a dollar plus shipping, but my link didn't work.

 

[clubplug]

Hi o1die

Thanks for the reply. The problem is not the connection of the monitors to the motherboard. I presently have one monitor connected to the VGA connector and the other monitor connected to the DVI connector. However, when I boot up the PC, I only get a signal on one of the monitors, the one connected to the VGA connector.

Is there something I am missing in the setup? I have Windows 7 Ultimate 64-bit.

This is driving me crazy....

Thanks again.
Frank

 

[o1die]

You may need a separate card in the pci-e slot if you don't have one yet to use the dvi. The vga splitter should work fine; you may find one for dvi; not sure.