Sign in with
Sign up | Sign in
Your question

Question regarding auto memory timings

Tags:
  • Memory
  • G.SKILL
Last response: in Memory
Share
November 12, 2011 10:18:54 PM

I have G.Skill F3-12800CL8D-8GBXM and the Auto timings on my MoBo show 9-9-9-28 when the timings are (per spec) 8-8-8-24.

Should I change the setting to manual and correct it? At the top of the bios it identifies the chips correctly (saying it is DDR3-1600 8-8-8-24) but below where the timings actually are it says the other 9-9-9-28.

Thanks for the help!

More about : question auto memory timings

a b } Memory
November 13, 2011 12:31:54 AM

Yes you should change the Memory timings in the BIOS, and set the manual voltages recommended by the Manufacturer too. Also, you can operate your memory @ 1333 MHz and Lower Voltage and Timings, Lower Timings = better performance.
So you're fine with both, 1333 MHz CL7 or 1600 MHz @ CL8.
m
0
l
a b } Memory
November 14, 2011 11:43:24 AM

Depending on your mobo you can eventually set you memory Kit to XMP in the Bios. In doing so the mobo will automatically set you memory profile to best performance.
m
0
l
!