Compatibilité f3-17000cl9d-8gbxm gskill

[Dadou334]

Hello I have a problem with my asus p8Z68 deluxe rev B3 and ram Gskill ripjawsX type F3-17000CL9D 8GBXM the ram status led is red , if I use the memOk button system try to configure but whitout success and error code 58 (Cpu initilialisation failed and all stay bloqued no video ! are they realy compatible with my asus motherbord ???


Thanks for help !!! I'm lost

Best regards Daniel

 

[pro-gamer]

yes, they are compatible but in how many sticks ram you have?

 

[Dadou334]

yes, they are compatible but in how many sticks ram you have?

Hi 2 x 4Gb package dual

 

[pro-gamer]

ok return it back if it is in under warranty its faulty.

 

[Dadou334]

ok return it back if it is in under warranty its faulty.

ok you think not compatible (excuse I'm french , i've only english school level)

 

[pro-gamer]

yes, return it.

 

[Dadou334]

yes, return it.

Ok Ireturn , but what can I put at this place , I think corsair 2 x 4 Gb 12800 (1600mhz) more compatible it seems

In all cases thank for help and support

Daniel

 

[pro-gamer]

yah! corsair vegeance are fast enough...

 

[Dadou334]

yah! corsair vegeance are fast enough...

Ok I will them monday or tuesday max by express , as soon as pôssible I'll return you the result

Have a nice week end , I don't forget you , Thanks again

 

[pro-gamer]

now select as best answer if you have done.dont leave it unsolved.

 

[Dadou334]

yah! corsair vegeance are fast enough...

Here the exact reference I've commanded :

Kit dual Channel DDR3 Corsair Vengeance, 2 x 4 Go, PC3-12800, CAS 9
Réf. : in10047201


You think compatible with P8Z58 deluxe ASUS ?????

 

[pro-gamer]

of course it's compatible.

 

[Dadou334]

of course it's compatible.

Ok I'll tell you monday or tuesday Bye

 

[pro-gamer]

haha ok bye....

 

[Dadou334]

haha ok bye....

Hi my dear friend , I have corsair rams since few minutes , try them and this is the same problem but the return code now is 38 (58 before) ?????

 

[Dadou334]

CPU soket pins are HS !!!!

 

[Dadou334]

SOLVED

 

[pro-gamer]

did you solved that problem?

 

[Dadou334]

did you solved that problem?

I become crazy , the pins of CPU socket seems broken , I return motherbord , for the rest I Sale

USA Support tell me that we can put the CPU on the socket just one time !!!????

 

[Dadou334]

did you solved that problem?

 

[pro-gamer]

ahhhh!! so the fault is in the cpu, pick a 2500k.

 

[Dadou334]

ahhhh!! so the fault is in the cpu, pick a 2500k.

It's same problem , if just you push on one side of CPU pins CAPUT

 

[Dadou334]

ahhhh!! so the fault is in the cpu, pick a 2500k.

Have you an email adress , I send you a photo , you will see the problem

 

[Dadou334]

ahhhh!! so the fault is in the cpu, pick a 2500k.

See what us support says , maybe I've not understand as well :

Dear Customer

You just have to insert them carefully. There is only 1 way to install them, so figure that out, then insert it. The CPU should fall right on, you should not push, move, or anything after it is on the pins. If you need to reseat it, you need to pull it off then try again.

For the two memory kits, you can try it, but we can not guarantee it since we did not test them together at factory.

Thank you
GSKILL SUPPORT

 

[pro-gamer]

just given you a tip, and i didn't seen your email where is that?