Sign in with
Sign up | Sign in
Your question

Clean install, bsod after driver install on "XFX Radeon 5770 1gb" ati2dvga reboo

Last response: in Graphics & Displays
Share
October 24, 2010 5:15:50 PM

After installing my driver (from windows, cd or lastest). It ask me to reboot.


After reboot, it bsod:
A problem has detected and windows has been shut down to prevent damage to your computer

The problem seems to be caused by the following file: ati2dvag

If this is the first time... restart your computer. If this sfcree appears again, follow these steps:
The device driver got stuck in an infinite loop. This usually indicates problem with the device itself or with the device driver programming the hardware incorrectly.

Please check with your hardware device vendor for any driver updates.

Technical information:

*** STOP: 0000000EA (0x89BEEDA8, 0x89D80008, 0xB9634CBC, 0X00000001)
ati2dvga Begining dump of physical memory




System spec:
Windows XP SP3 Pro
XFX Radeon 5770 1gb
PSU: 500w Antec
Mainboard: Asus P5KPL-VM LGA775
Chipset : Intel G31/G33/G35
Processor: Intel Core 2 Duo E8400 @ 3000MHz
Memory: 2x 1gb PC2-6400 DDR2
Hard drive: 2* 500go SATA wd
My motherboard is update to the latest BIOS.

edit:
I alway instal driver from a clean install.
I ran all kind of test. Memory, CPU, motherboard, hard drive. Nothing abnormal was found.
For the past 4 month my apartment got 3-4 electric cut / blackout.

edit2:
Made a full scan with Avast lastest version (rootkit, memory, all drives)
Full scan with Spyware Doctor
Everything is clean !
October 25, 2010 2:09:11 PM

Requirement:
http://support.amd.com/us/kbarticles/Pages/GPU-2-ATICat...

The Installation Process:
1. System readiness check (The following system requirements must be checked and available before installing the latest Catalyst driver)
* Administrator privileges Check
* Microsoft .NET framework
* Microsoft Direct X 9.0 or higher
* Windows XP with Service Pack 2 or higher SP3 Check
* Windows 2000 with Service Pack 4 or higher
2. Finding the latest ATI Catalyst driver 10.10 Check
3. Download the latest Catalyst driver
4. Uninstall any legacy ATI or other display drivers (where applicable) no driver Check
5. Run the driver installation procedure

//Sinic on
Oh ya, right, you can instal driver even if the .net framework is not on your computer. Thank you ati to make your driver for wize kid and technical people only !
//Sinic off
.net framework 2.0 or more is ESSENTIAL.

It my first experience with an ati card. I'v vever had problem with geforce.
I hope my future experience with ATI will go smoother !!!
m
0
l
October 30, 2010 12:51:49 AM

My onboard video is dead.

I test another card. Same problem.
I test my card in another coputer, everything is fine.

With all the test I ran, i presume that my motherboard is dead !!!
m
0
l
!