Sign in with
Sign up | Sign in
Your question

Cm strom scout fan

Tags:
  • Power Supplies
  • Switch
  • Fan
  • Components
Last response: in Components
Share
March 24, 2011 9:14:59 AM

Hello, I've just got my cm strom scout mid tower case everything runs smoothly except of fan leds, the power 2wire connectors are plugged in, switch molex is plugged in as well, however when i was looking for loose ends or whatever that 3 wire connector which connects the switch with its molex is missing one pin ... so..is this a problem or am i missing something else ?

More about : strom scout fan

March 24, 2011 4:55:24 PM

No, I have that case, and one of the fans is a two pin connector, and one is 2 wires in a 3 pin socket. Make sure all molex connectors are connected, oh, and try your led on/off button and make sure its plugged into the mobo correctly.
a b ) Power supply
March 24, 2011 8:32:42 PM

Flightsimluke said:
No, I have that case, and one of the fans is a two pin connector, and one is 2 wires in a 3 pin socket. Make sure all molex connectors are connected, oh, and try your led on/off button and make sure its plugged into the mobo correctly.

Also, the LEDs' on that case aren't real bright lights, so you may not notice them being on in a well lit room.

March 24, 2011 11:16:59 PM

hmm .... i cant seem to find any mobo connector ...and the other forums wrote the switch/leds have no home pins on motherboard so .... hm..guess i just try to check any loose and or whatsoever .... well I know they are not shiny ones, even so they just dont work .... thanks for advice anyways
!