/ Sign-up
Your question

How do I light my cases LED lights?

  • Power Supplies
  • Light
  • Cases
  • LED Monitor
  • Components
Last response: in Components
March 26, 2011 1:24:19 AM

My case has LED lights on the front (NZXT Lexa S Mid-Tower) and I don't know how to get them running.
My case has many built in wires, I looked through them coming across ones such as the case power switch...... the I found one named "PWR LED" which I figure powers the cases LED lights. It is a male molex connector but now I don't know what to do.

Thanks in advanced!

More about : light cases led lights

Best solution

March 26, 2011 5:31:38 AM

that's correct , "PWR LED" is for LED .
you must find the PWR LED connection on main-board , and you can find it easy by checking MB manual !
a c 105 ) Power supply
March 26, 2011 9:09:01 AM

when you say led lights on the ffront, do you mean the normal power/hard drive activity lights or do you mean pretty decorative lights?
the one you found labelled pwr led is for the light that shows you the pc is on, not any pretties
but as Vanguard says, your mobo manual will have header guides and your case leads should be traceable
Related resources
a c 255 ) Power supply
March 26, 2011 1:54:28 PM

PWR_LED = the little pen tip sized light that indicated PC is on

HD_LED = the little pen tip sized light that indicated HD activity is taking place.

Both are two pin connectors that connect to the corresponding MoBo headers. The location will be clearly shown in your MoBo Manual.....usually at lower right corner of MoBo.
April 6, 2011 12:53:23 AM

Best answer selected by YeahChuck.