GA-P67A-UD4-B3 memory timing issue

[Infiltrate0]

I have a GA-P67A-UD4-B3 motherboard and G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) memory and the mother board is setting the timings high automatically (and the frequency too). Does anyone know why and if I can get it to fix itself or should I just manually set the timings?

 

[wintermint]

I recommend setting the timing manually. My gigabyte motherboard ran my ddr3 memory at lower speed and also at higher voltage than desired. I manually set it and everything went well from there.

 

[Deleted member 217926]

I have to set my voltages and timings manually on my P67A-UD4. It defaults to DDR3 1333 cas 9 and 1.5v. I have DDR3 1600 cas 7 1.6v that runs just fine when set manually.

 

[Infiltrate0]

Thanks guys

 

[Infiltrate0]

Best answer selected by Infiltrate0.

 

[Mousemonkey]

This topic has been closed by Mousemonkey