Sign in with
Sign up | Sign in
Your question
Closed

ASRock Z68 Extreme3 Gen3+CM Hyper 212 Evo?

Last response: in Motherboards
Share
December 15, 2011 12:58:48 AM

Will a CM Hyper 212 Evo on a ASRock Z68 Extreme 3 Gen3 Mobo cover up two memory slots? I already have the CM Hyper 212 Evo and I am worried that if I put it on my Mobo, it will cover up too much memory slots.
December 15, 2011 6:26:59 PM

I just set the same thing up as long as you don,t have large heatsinks on ram you'll be fine the fan on push pull system covers a very very small section, simply remove the fan closest to RAM slots on cooler and then install ram and put fan back on. Cake GL. :) 

-SMann
December 15, 2011 6:27:55 PM

It hardly covers over first RAM slot...
Related resources
December 15, 2011 9:08:10 PM

I have the G.Skill Ripjaws X Series 8GB (2 x 4GB). Those have big heatsinks on them. I heard that you can raise the fan up a little bit so you can put them on there, is that true? If I raise the fan up, will it make my CM Hyper 212 Evo a little hotter?
January 23, 2012 7:51:14 AM

did the 212 evo fit on your mobo?

Best solution

January 23, 2012 7:12:55 PM
Share

brvsball said:
I have the G.Skill Ripjaws X Series 8GB (2 x 4GB). Those have big heatsinks on them. I heard that you can raise the fan up a little bit so you can put them on there, is that true? If I raise the fan up, will it make my CM Hyper 212 Evo a little hotter?



I just setup this combo. Move the memory to the 2nd and 4th slots (instead of the 1st and 3rd) and everything will fit fine. That way you can keep the entire fan on the CM 212 and not lose any cooling benefit.
February 6, 2012 3:01:27 PM

Best answer selected by brvsball.
a b V Motherboard
February 6, 2012 3:08:27 PM

This topic has been closed by Mousemonkey
!