Word :    Username :           
 

A coworker directed me here.

So, the situation. I have a desktop wired to a Linksys WRT54G router (call it Main), an old laptop newly equipped with a Linksys Wireless-G Notebook Adapter (call it Term), and a brandnew HP Pavilion laptop with built-in wireless G tech (call it Lap), all running XP SP2. After going through the normal set-up procedures, I was able to get each one to connect to the internet, via the router (SBC Yahoo DSL, if it makes any difference). I then attempted to set up the home networking aspect of the computers. In other words, file and print sharing. After a round of "Oops, forgot that setting," I stood at the following conditions:

* Lap and Term could share between each with no problems

* Main had full access to the shared folders on Lap and Term

* Lap and Term could not access the shared folders on Main

* Main could not access the shared folders on Main when using My Network Places

In the later two conditions, the computers could see the first level of folders, but permission was denied when attempting to open the folders. The error message generated is as follows:

"//Main/SharedDocs is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.

Not enough server storage is available to process this command."

I have gone through the support pages at Microsoft (318030 in particular) and nothing has worked. I have turned off all firewalls. The folders are set to be shared. There are some problems with other programs on Main that seem to result from access being denied. So I'm pretty sure that access is being improperly denied by Main, even though an administrative account is being used to make these settings. Is there anything I can do, or do I have to do a reinstall of Windows?

Sponsored Links
Register or log in to remove.
- 0 +

Are you using simple filesharing on all of the computers?
Do you have the same username and password on each computer?
If not do you have your guest account turned on on each computer?

<A HREF="http://www.folken.net/myrig.htm" target="_new">My precious...</A>

Reply to folken

I was hoping to avoid the "are you an idiot phase" but it looks like I'll have to detail everything we have done to this date.

Filesharing:

Go to My Computer. Under Files Stored on This Computer, right-click Shared Documents and select Sharing and Security... from the pop-up menu. On the Sharing Tab, select both check boxes in the middle section ("Share this folder on the network" and "Allow network users to change my files" under (Network sharing and security" )

Remember, I have XP with multiple users (my wife and I). Currently, there are no passwords, but once I get the network properly set-up, that will change. However, this sounds like an apples-to-oranges question. Please explain further.

Two of the computers have guest access, Lap does not. What difference does this make?

Reply to TheRealDANGERBOY
- 0 +

I'm not sure the best way of explaining this but I'll give it a shot. Sorry if I sound like I'm dumbing up things but I do tech support for a living so it has become a habit :)
In a domain all authentication is done via a central server so each machine does not have to carry each users credentials. In a workgroup there is no central server so each machine must have each users credentials.
If identical accounts (user and pass) do not exist on all the computers they will pretty much see eachother as being unfriendly. Enabling the guest account will essentially allow anonymous access to your share allowing the unfriendly computers to access eachother. If you have the same username and password on each computer they will see eachother as friendly and should have no problems communicating w/ eachother. This requires that you have a password, blank passwords will not work.

<A HREF="http://www.folken.net/myrig.htm" target="_new">My precious...</A>

Reply to folken

Then why does it work for two of the machines, but not the other? Remember, the one machine can access the other machines. Reread the symptoms, you are misdiagnosing the problem. Baka!

Reply to TheRealDANGERBOY

I've found that simple file sharing interferes a lot. Turn it off. Then, on main, re-create each share, setting everything to max (and make sure disk quota is turned off). Then, delete the other share (it will be $c, $d, etc...). Then, try opening the folders.

The curious point is this insufficient drive space deal. I'll play around a bit more. Just as a question, what's listed when you type "net share" in the command prompt?

umheint0's phat setup --> <A HREF="http://home.cc.umanitoba.ca/~umheint0/system.html" target="_new">http://home.cc.umanitoba.ca/~umheint0/system.html</A><--

Reply to umheint0
Tom's Hardware > Forum > General Networking > Network General Discussions > Home Network - File Sharing
Go to:

There are 617 identified and unidentified users. To see the list of identified users, Click here.

Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
They won a badge
Join us in greeting them