WILL IT WORK?

HELLO

THIS IS MY CHIPSET www.dell.com/.../global/products/.../spec_optix_gx520-gx620_en.pdF

CAN I INSTALL RAMS OF DIFFERENT FREQUENCY AND MEMORY AS FOLLOWING

SLOT NO. 1 512MB 667MHZ

SLOT NO. 2 512MB 667MHZ

SLOT NO. 3 2GB 800 MHZ

SLOT NO. 4 EMPTY


ANY SUGGESTIONS PLZ IF IT WILL NOT WORK BECAUSE I WANNA BUY A NEW MEMORY STICK TO UPGRADE RAM. THAKS :p
5 answers Last reply
More about will work
  1. Yes , but the higher like 800Mhz will run at 667 Mhz.To run better put 512MB in slot 1- 3 , and if you put another 2GB put in slots 3 - 4.And you will have memory running is dual channel mode.
  2. That should work I have however seen some systems that will not boot at all with different ram speeds not many but I have seen a few.
  3. It's a crap shoot ..... I have had RAM with exact same speed and timings (different brands) not work together. Check your manual to see what is theoretically possible ... your link isn't working.
  4. Memory 4 DIMM slots (2 DIMM slots on USFF chassis); Non-ECC dual channel shared2
    DDR2 SDRAM system memory (533Mhz) up to 4GB
  5. these are memory specifications of the chipset
Ask a new question

Read More

Memory