Will this work for my setup?

[boyahdk]

I was browsing around for different pieces of hardware and I came aross this:
http://www.amazon.com/Corsair-Vengeance-Channel-Memory-CMZ16GX3M4A1600C9B/dp/B004RFBIUU/ref=pd_cp_e_4
It looks like a good deal, but I dont know if its right for my computer.
Here is the Cruitial.com scan of my computer
http://www.crucial.com/systemscanner/viewscanbyid.aspx?id=3B8A80D931D926C3.
Thanks in advance.

 

[o1die]

You must have an x58 1366 motherboard. I suggest another 3 x 2gb kit of 1600 cl9 ram. You may want to pull one stick and match the brand. Those are easy to find used on craigslist. Most are around $40-50.

 

[boyahdk]

Will http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=ED7FED64A5CA7304 work?
I dont have the time to take my computer down right now.
or can anyone provide a link to a good 2x3?

 

[o1die]

Here you go: http://www.amazon.com/Kingston-Modules-1600MHz-KHX1600C9D3K3-12GX/dp/B002IO2UM2/ref=sr_1_8?s=electronics&ie=UTF8&qid=1325024945&sr=1-8

 

[o1die]

If your old ram won't run with the new kingston, you can sell it. 12 gb is plenty.

 

[boyahdk]

Thank you to you bot

 

[o1die]

To answer your last question about crucial, get the 3x4 gb kit from them if it's guaranteed to work. The price and performance difference between 1600 and 1333 ram is small. Your board can run with up to 24 gb of ram, 4 gb per slot.

 

[boyahdk]

PS will the 16gb version take if I just take out the 3 2GB ones I have in right now?

 

[o1die]

I don't recommend running with 4 ram slots on an x58 board. dell boards are sometimes picky about ram. Use either 3 or 6 of the ram slots for tripple channel support, which is supported by your chipset if you use the proper ram slots.

 

[boyahdk]

ok thanks again