Cpu water cooling for overlcoking

is this good for overlocking to maximum a phenom iI 6 110T?

ONE OF THESE? or both


corsair CWCH50


COOLIT ECO-R

??

thx
21 answers Last reply
More about water cooling overlcoking
  1. Please reconfirm your computer hardware then get back to us.

    And i dont think water cooling is something for a someone inexperience to handle.From your post i dont think you are experience.You can however prove me wrong but once your pipe gets damaged or you have badly taken care of your hardware you would lose hundreds of dollars.
  2. Cooler Master Hyper 212+
  3. the pre filled no hassle kits are a good solution to cpu cooling. Such as the Corsair hydro H70. I had my I7 @ 4ghz around 75-80 degrees until I bought this cooler which dropped it to under 50 on full load
  4. dhicks19 said:
    the pre filled no hassle kits are a good solution to cpu cooling. Such as the Corsair hydro H70. I had my I7 @ 4ghz around 75-80 degrees until I bought this cooler which dropped it to under 50 on full load



    well yeah i thoguht they did not need any maintanance ..
    but are those good for full overclocking?
    the corsair 50 and the other one i listed here?

    is antec kühler h2o 620 as good as the corsair 50 or better? or the other one
  5. They are fine for fully overclocking your cpu, I would get the kuhler 620 as it rates slightly better than the Corsair 50.

    Look here: http://www.hardocp.com/article/2011/03/10/antec_khler_h2o_620_cpu_water_cooler_review/3
  6. the problem is i cant get them in one online store toger het the amd II6 110t cheapest is in anothe ronline store so i have to either get hte 50 or pay twice for transport.
  7. http://www.frostytech.com/articleview.cfm?articleid=2419&page=4
    You could check out this.Even tho its not water cooling but might give you something.
    I dont advice water cooling because it can damage parts.
  8. it wont damage parts if you have the sealed ones right? or am i wrong?

    will the antec and corsair be sealed right?

    BTW can i reuse my water cooler for anothe rbuild dlater?
  9. shadstarn said:
    it wont damage parts if you have the sealed ones right? or am i wrong?

    will the antec and corsair be sealed right?

    BTW can i reuse my water cooler for anothe rbuild dlater?

    Water cooling is good if you know how to manage the component.
  10. i repeat

    it wont damage parts if you have the sealed ones right? or am i wrong?

    will the antec and corsair be sealed right?

    BTW can i reuse my water cooler for anothe rbuild dlater?
  11. i havent used water cooling yet but from my experience with people using water cooling it is more dangerous.
    Of course you can try and say i am wrong but i just dont suggest water cooling to those who are very inexperience.
    Sorry cant help you anymore.
  12. okay , i understand your concern and i agree but i thought the new ones dont need tha tsort of maintanance
  13. These are indeed sealed "no maintenance" kits but that doesn't mean something can't go wrong.

    Also, they aren't really any better than good air cooling, just more expensive. The only really good thing is that they won't interfere with RAM slots.
  14. i thought they would be easy to install , i don tmind payin ga littl emore for that.. because i really really dont want to open my mother board
  15. You will still have to pull the motherboard out, pull the back plate off the CPU socket, put the appropriate retention plates on the front and back of the board, then mount the cooler, then put it back in the case, its not that much easier to install, but it is close to double the price for a tiny bit better cooling.
  16. i really never remember having to putt any xcalmps on the cpu ... wow.. my stock ones seem to be jujst putt right on ...
    ou have a point there but i am faced with bigger questions right now

    this is my current build : how long could my system last as a plausible gamimg machine if i replaced the processor with the 110t and overlocking .. or should i just wait 2 eyars and build a intel one.. because the intel 7 cpu is not much more expnesive then the 110 t here in norway.


    AMD Phenom 9850 BlackEdt 2,5 Ghz BOXED
    Socket AM2+ Quad-Core 4MB cache

    1

    1 196,-


    1/4/2009

    25418


    OCZ DDR2 4096MB Gold GX XTC Dual Channel
    PC2-6400 2x2048MB 800MHz. (5-5-5-18)

    2

    360,-


    1/4/2009

    26151


    OCZ StealthXStream strømforsyning 600W
    20/24pin ATX/BTX/PCI Express/SATA

    1

    620,-


    1/4/2009

    28877


    Seagate Barracuda 7200.11 500 GB
    7200RPM, 32MB, SATA2

    1

    440,-


    1/4/2009

    34355


    Asus M3A79-T Deluxe, AMD 790FX+SB750
    ATX, Socket-AM2+, DDR2, 4xPCI-Ex(2.0)x16

    1

    1 316,-


    1/4/2009

    29865


    Netshop Miditower "Boreas"
    Sort u/powersupply

    1

    396,-


    1/4/2009

    33508


    ASUS Radeon HD6870 x 2 crossfire


    9/24/2006

    13902
  17. As we have stated the best bang for the buck still stands at i5 2500k however if you want to wait you can get to see amd bulldozer which will be competing against intel sandy bridge architecture
  18. Or just buy a Phenom X4 955 which is significantly better than what you have and yet not that much money. Then, just save up... it'll be around $500 for a good i5+mobo+ram
  19. wolfram your right but the fact is here the 955 is not much cheaper either from the 6 core monster.. its actually just 60 70 buks difference.. which makes it stpuid for me to go for the 955 specially also because i make music and do conversions which would benefit from the 6 core.. and the 6 core overlocked seem to be something even gamers like recently
    500 is still too much for me as an upgrade.. i bet just momentarely atelst the upgrade to cpu would be enogh to get teh boost i need as of pr day . but i dont know if it will last atleast 1 year .
    games are getting more effiecient thankfully but i don tknow
    i already run crysis 2 on full and pretty good speed almost exactly no lag.. so i bet the cpu upgrade will take away any unnoticable lags too but i dont know if game developement for the next year will go in the same direction or not. i kinda hope i could run duke 4 ever fluently at this point
  20. hey guys i did order the II 6 110 AND liquid cooler .. so i am going ot overlock it! hope it will change somethings

    i now wonder why my pc cant find the second graphic card suddenly .. it only shows one card?
    also inside device manager only one card?
    how can i fix this?
    i checked the hardware is connected like it was before when it did find it.
    this happened after i installed msi afterburner
  21. i got this now
    and i will probably overclock it .. do i need to buy paste ? or does the paste come with these and which of the paste should i use .. if i have to buy paste what type of paste and brand do you recommend ?

    Antec KÜHLER H2O 620 -
    AMD Phenom II X6 1100T Black Edition - 3,3 GHz - Socket AM3 (HDEOOZFBGRBOX)
Ask a new question

Read More

CPUs Water Cooling Corsair Phenom