My idle temp for the GPU is 56 C, and 75-80 C at full load.
My CPU is a little hot at 48 C to 60-65 C at full load.
I am not sure what the problem is, I cleaned everything off, re-applied thermal paste a few times, made certain that the connection was tight, have fans running on high all the time, and still no luck.
Any ideas on what could be going on?
Thanks for any input, and let me know if I can provide any additional information. Specs are below:
Seagate Barracuda 7200.10 ST3320620AS (Perpendicular Recording Technology) 320GB 7200 RPM SATA 3.0Gb/s Hard Drive
Antec NeoPower 550 550W ATX12V SLI Certified CrossFire Ready Active PFC Power Supply
As long as everything works fine your card should be OK. Considering you cleaned and all that stuff all I can say is you might have put too much paste applied. Other than that as long as everything works I wouldn't worry, but I'm not an expert or anything