Sign in with
Sign up | Sign in
Your question

New Corsair Dimms

Last response: in Memory
January 2, 2012 5:40:02 PM

I have a Rampage III Extreme mobo and the dimms that I first got and have had installed are as follows.

Existing ram: Corsair.. installed 4-20-11
8GB (2x4gb) XMS 240 pin DDR3 SDRAM 1600Mhz (PC3 12800) CMX8GX3M2A1600C9
Voltage 1.65V
Timing 9-9-9-24

I have just added a couple more dimms for a total of 16GB between the two. (XMS and Vengeance)

New ram: Corsair.. installed 12-31-11
8GB (2x4gb) Vengeance LP (low profile) 240 pin DDR3 SDRAM 1600Mhz (PC3 12800) Jet Black CML8GX3M2A1600C9
Voltage 1.5V
Timing 9-9-9-24

My question is am I getting the full performance out of the two with the differences in voltages between the two, and if not please advise me as what to do. Nothing has been overclocked and bios settings have not been changed.

Thank you in advance for help/suggestions.

More about : corsair dimms

a b } Memory
January 2, 2012 7:07:57 PM

-- You are not overclocking.
-- Your system runs with both sets of RAM, even though 1 set is set to run at 1.65V and 1 set is set to run at 1.5V
-- Each set of RAM is the same speed (1600MHz) and has the same latencies (9-9-9-24).
-- Yes, you are getting full performance from your system.
January 3, 2012 10:05:05 PM

Thank you very much,treefrog. I am glad to heaar that!
Related resources