Asrock z68 extreme4 gen3 code 45

[remygeldof]

Hello,

seems slot one is the problem. i can boot with the other 3 memory sticks in. memory is not on the list of approved memory. but it was all working fine and then all off a sudden I'm having this problem. if i take out the memory nearest cpu and put it back in then it boots.. anybody got a proper sloution or does the board have to go back?

Cheers!

 

[nikorr]

Post the RAM info u want to use...

 

[remygeldof]

Hi,

Do you mean what memory I'm using? it's corsair vengence at default 1333.

 

[remygeldof]

Post the RAM info u want to use...

Hi,

I'm using Corsair vengence 1333.

 

[nikorr]

Can u post link?

I assume they are all the same?

GB per stick?

 

[remygeldof]

Can u post link?

I assume they are all the same?

GB per stick?

This is the kit I using.. Corsair CMZ16GX3M4A1600C9 16GB 1600MHz CL9 DDR3 Vengeance Memory Four Module Kit
xmp 1.2 takes them up to 1600 which was all running fine until this code 45 thing popped up. Now it seems the machine will post if i take out the memory in slot one nearest the cpu.. I've read bent cpu pins could be the culprit but it was all fine
so if it was bent pins I would have expected problems from the start. Unless bent pins manifest it self after some usage.
But does that mean my cpu has been damaged now because of the motherboard?