HAF 922 and Corsair H50

[tgellen]

Does the airflow in this diagram look good. I want to put a Corsair H50 in a Cooler Master HAF 922.
On this diagram, there will be a 200mm intake on the right, a 120mm intake on the bottom, a 120mm intake on the top, another 120mm intake on the top with the H50 radiator in a push/pull, and a 120mm outtake on the left, and a 200mm (red circle_ outtake on the side panel.
This seems like it will create a slightly positive pressure and still provide good airflow since the fans on the bottom right should direct the air to the upper left.
Does this look good/do you have any suggestions?

 

[JackNaylorPE]

Read this before plunking down money on the H50.... The H50 is a rebranded Asetek model. The Antec version, also manufactured by Asetek, contains some Antec specific design changes which improves performance by 7.2C.

http://benchmarkreviews.com/index.php?option=com_content&task=view&id=694&Itemid=62&limit=1&limitstart=4

As for the airflow, no it doesn't make sense. Why would you want the air heated up by the radiator being fed into the case ?

In in front and bottom, out on top and back.

 

[Ubrales]

Use this formula:

Intake - Front, Side, Bottom

Exhaust - Rear, Top

And, try to equalize the Intake and Exhaust air flows in CFM (within 15% is ok)