- May 26, 2010
- 6
- 0
- 18,510
Hello to all,
Using a D-Link WBR-1310 Firmware Revision 1.04 which has worked for years. Was set at 10/100MB but always on a 10MB Cards. New system, 100MB built in lan connection and Windows 7 Ultimate 64 bit. 3 to 4 times a day it will get the wrong ip address and dump. Using disable and enable repeatedly I can usually get it back from "Unidentified Network" to "Network" and it starts working again. A second computer on ethernet with XP Pro and previously XP home never drop out, ever. Most consistent method to fix is to go into router and turn mac filtering off, connect with computer and turn Mac filtering back on. Not 100% reliable the first time.
Any ideas or suggestions greatly appreciated. Thanks in advance.
glennc7000
Using a D-Link WBR-1310 Firmware Revision 1.04 which has worked for years. Was set at 10/100MB but always on a 10MB Cards. New system, 100MB built in lan connection and Windows 7 Ultimate 64 bit. 3 to 4 times a day it will get the wrong ip address and dump. Using disable and enable repeatedly I can usually get it back from "Unidentified Network" to "Network" and it starts working again. A second computer on ethernet with XP Pro and previously XP home never drop out, ever. Most consistent method to fix is to go into router and turn mac filtering off, connect with computer and turn Mac filtering back on. Not 100% reliable the first time.
Any ideas or suggestions greatly appreciated. Thanks in advance.
glennc7000
Facebook
Twitter
Instagram