Sign in with
Sign up | Sign in
Your question

Just Built... No Power

Last response: in Systems
Share
February 12, 2011 7:40:07 PM

hi,

i just built a gaming rig and i plugged it into the wall and its not turning on. This is my first build so i am assuming i did something wrong. I tried different power cables and different outlets but still no luck. One thing that i am a little confused about is the power button. On the case all the front panel wires are plugged in except there were about 4 wires that were twinded with white and some other color. They saide things like LED and 3 of them are 2-pin and one of them is 3-pin. I had no idea were to put them so i just plugged them in on the edge of the motherboard where there were two rows of pins. Also i was watching some videos and on the power supllie there were switches that saide 115 or something like 250. My power supply doesnt have that

thanks

More about : built power

February 14, 2011 2:44:29 PM

List the specs.

You can power up a pc by shorting the PWR pins with the tip of a ballpen. The pins are pictured in the mobo manual.
!