I have some F3-10666CL9S-4GBNT (4Gx1) / F3-10666CL9D-8GBNT (4Gx2) (G.SKILL 4g ddr3 ram) for a asus p8z68-m pro and it seems to work fine. I am having an issue that my computer randomly will shut off and will start up again with the bios going to the press f1 to begin setup blahh blahh blahh. Now if i turn off my computer by itself it dosent go to that. Is this maybe a issue with my motherboard or memory? I currently have it running my computer says its 4g of ram and all.
these are specs for my ram Specification
System Desktop System Type DDR3 M/B Chipset Intel P67 Intel H67 Intel H61 Intel P55 lntel H55 Intel X48 Intel P45 Intel X38 AMD 890 Series AMD 790 Series CAS Latency 9-9-9-24 Capacity 4GB(4GBx1) / 8GB(4GB x 2) Speed DDR3-1333 (PC3 10666) Test Voltage 1.5 Volts Registered/Unbuffered Unbuffered Error Checking Non-ECC Type 240-pin DIMM Warranty Lifetime
4 x DIMM, Max. 32GB, DDR3 2200(O.C.)/2133(O.C.)/1866(O.C.)/1600/1333/1066 MHz Non-ECC, Un-buffered Memory Dual Channel Memory Architecture Supports Intel® Extreme Memory Profile (XMP) * Hyper DIMM support is subject to the physical characteristics of individual CPUs. * Refer to www.asus.com or user manual for the Memory QVL (Qualified Vendors Lists). * Due to CPU behavior, DDR3 2200/2000/1800 MHz memory module will run at DDR3 2133/1866/1600 MHz frequency as default.
More aboutcompatible memory
Try just with one memory stick. If you see one is good , switch with the other , maybe one stick is not good.