Sign in with
Sign up | Sign in
Your question

How to solve this bios error message?

Last response: in Motherboards
Share
January 29, 2012 4:49:44 AM

im using the biostar bios utilty to update my bios from dekstop. when ever i try to update it it says - access violation at address 778243d0 in module 'ntdll.dll' .Read of address 00000004. THANKYOU A TON IF YOU CAN HELP !
a c 128 V Motherboard
January 29, 2012 5:32:03 AM

Updating BIOS - from the biostar site
All modern Biostar motherboards feature the Flasher technology for easy BIOS updating. If you have a legacy board, please download the Award flashing utility and follow the instructions in the README.TXT file instead. The procedure below does not apply to legacy boards.

Most motherboards' BIOS files have the BIN extension. Some do not (for instance, NCD1208.BSP, NHA0302.BF, etc). Regardless of its extension, after downloading the BIOS file is ready to use as-is. You do not need to do any kind of decompression or extraction.

Download the BIOS file (in this case, VIT0312B.BIN) then save it to a floppy disk. Restart your computer. Enter the CMOS setup by pressing <DELETE> at the POST or Biostar splash screen. Make sure the disk is in your floppy drive, choose "Upgrade BIOS" from the CMOS Setup main menu. The Flasher utility will automatically detect and highlight the BIOS file (in this example, VIT0312B.BIN) on the next screen.

Make sure the BIOS file (in this case VIT0312B.BIN) is highlighted and press Enter. Answer Y when prompted "Are you sure to flash?". After the flashing is done, reset the computer and enter CMOS setup again. This time choose "Load Optimized Defaults" from the main menu. Finally, hit F10 to save and exit.

BIOS update is complete.
m
0
l
Related resources
!