Tom's Hardware > Forum > Mobility Networks > Cingular > Anyone heard of this error message?

Anyone heard of this error message?

Forum Mobility Networks : Cingular - Anyone heard of this error message?

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Word :    Username :           
 

Archived from groups: alt.cellular.cingular (More info?)

 

Several times when I've attempted calling my brother's Cingular (AT&T side)
cell phone I get the recordering "the cellular user you are attempting to
reach is not accepting calls at this time". My brother has done nothing out
of the ordinary with the phone. He is in his home area (Lakeland, FL) with
a good signal. When he calls customer care to ask about it they can only
say that they have never heard of that error message and they don't know
what it might be causing it! Any ideas?

Fred

Sponsored Links
Register or log in to remove.

Archived from groups: alt.cellular.cingular (More info?)

 

I've had several people say they've called me and got this message.
And they act like I wasn't accepting calls on purpose!
I called Cingular and she said I needed to turn off my phone each day for
about 3 minutes or more (which I'd NEVER done) so it can "refresh" or pick
up the updates.
She said it *should* also help me with having dropped called and lack of
signal
I've been trying to remember to that, but the above problems still happen.
Go figure....




"Fred" <agunat@yahoo.com> wrote in message
news:lcyge.4125$It1.3272@lakeread02...
> Several times when I've attempted calling my brother's Cingular (AT&T
side)
> cell phone I get the recordering "the cellular user you are attempting to
> reach is not accepting calls at this time". My brother has done nothing
out
> of the ordinary with the phone. He is in his home area (Lakeland, FL)
with
> a good signal. When he calls customer care to ask about it they can only
> say that they have never heard of that error message and they don't know
> what it might be causing it! Any ideas?
>
> Fred
>
>

Reply to Anonymous
- 0 +

Archived from groups: alt.cellular.cingular (More info?)

 

On Wed, 11 May 2005 22:22:56 -0400, "LMW" <every@nospam.bellsouth.net>
wrote:

>I've had several people say they've called me and got this message.
>And they act like I wasn't accepting calls on purpose!
>I called Cingular and she said I needed to turn off my phone each day for
>about 3 minutes or more (which I'd NEVER done) so it can "refresh" or pick
>up the updates.
>She said it *should* also help me with having dropped called and lack of
>signal
>I've been trying to remember to that, but the above problems still happen.
>Go figure....
>
>

I don't know what phone you are using but that message is sent to callers
when you have your "call forward" setting in your phone to "all calls"
"off" and you don't answer the phone before it times out to voice mail and
when your phone is powered off.

Also if you want to set your default amount of rings timing before it goes
to voice mail this is one way:

where XXXXXXXXXX is the ten-digit voicemail system number for your area and
tt is the time in seconds you want the phone to ring for. Valid numbers for
tt are 5, 10, 15, 20, 25 and 30. Since each ring is approx. 5 seconds
including the blank space between them, that means 30 seconds should give
you about 6 rings and that's the maximum you can do.

For instance, to set the longest ring delay for the NYC market you would
dial:

*61*+19084630020*11*30#

After pressing the "send/call" button you should get some sort of
confirmation message.

Note: If you don't know what the voicemail system number for your area is,
dial *#61# on your phone.
>
>
>"Fred" <agunat@yahoo.com> wrote in message
>news:lcyge.4125$It1.3272@lakeread02...
>> Several times when I've attempted calling my brother's Cingular (AT&T
>side)
>> cell phone I get the recordering "the cellular user you are attempting to
>> reach is not accepting calls at this time". My brother has done nothing
>out
>> of the ordinary with the phone. He is in his home area (Lakeland, FL)
>with
>> a good signal. When he calls customer care to ask about it they can only
>> say that they have never heard of that error message and they don't know
>> what it might be causing it! Any ideas?
>>
>> Fred
>>
>>
>

Reply to Razor

Archived from groups: alt.cellular.cingular (More info?)

 

In article <bel581t6lf418fl8qqfkphpvkbruo45jpa@4ax.com>,
>
> >> Several times when I've attempted calling my brother's Cingular (AT&T
> >side)
> >> cell phone I get the recordering "the cellular user you are attempting to
> >> reach is not accepting calls at this time". My brother has done nothing

> I don't know what phone you are using but that message is sent to callers
> when you have your "call forward" setting in your phone to "all calls"
> "off" and you don't answer the phone before it times out to voice mail and
> when your phone is powered off.
>

I don't think that's the message Cingular (not ATT) uses for that
though. I don't have voicemail on Cingular since I use a one-number
service--if I call the cell directly and don't answer or hit "decline
call" the caller hears "the wireless customer you are calling is not
available--please try again later" twice and then the call disconnects.
ATT might use the other message though.

I've gotten that message myself a few times lately. It plays the
message and then disconnects. In one case I know for sure it was a
Verizon customer who hadn't paid the bill on time--apparently "V" is
very quick at suspending the phone and there is a period of time between
the time it's suspended but before they totally cancel the service when
a caller would get this message. Might be the case with C/ATT also.
You'd think they'd get more action if they made it "The person you're
calling is late paying our bill--if you see him/her please tell them
we're not sending their calls through until we see some money." :-)

--
Jud
Dallas TX USA

Reply to Anonymous

Archived from groups: alt.cellular.cingular (More info?)

 

> I don't know what phone you are using but that message is sent to callers
> when you have your "call forward" setting in your phone to "all calls"
> "off" and you don't answer the phone before it times out to voice mail and
> when your phone is powered off.
>
> Also if you want to set your default amount of rings timing before it goes
> to voice mail this is one way:
>
> where XXXXXXXXXX is the ten-digit voicemail system number for your area and
> tt is the time in seconds you want the phone to ring for. Valid numbers for
> tt are 5, 10, 15, 20, 25 and 30. Since each ring is approx. 5 seconds
> including the blank space between them, that means 30 seconds should give
> you about 6 rings and that's the maximum you can do.
>
> For instance, to set the longest ring delay for the NYC market you would
> dial:
>
> *61*+19084630020*11*30#
>
> After pressing the "send/call" button you should get some sort of
> confirmation message.
>
> Note: If you don't know what the voicemail system number for your area is,
> dial *#61# on your phone.

These have been very helpful, thank you for sharing them.

Is there a location where there I might find more "programming" options like
these, since I'm assuming that they're all standard with GSM?

TH

Reply to Anonymous

Archived from groups: alt.cellular.cingular (More info?)

 

In article <42854BBE.BC64732C@example.net>,
Tropical Haven <email@example.net> wrote:

> > I don't know what phone you are using but that message is sent to callers
> > when you have your "call forward" setting in your phone to "all calls"
> > "off" and you don't answer the phone before it times out to voice mail and
> > when your phone is powered off.
> >
> > Also if you want to set your default amount of rings timing before it goes
> > to voice mail this is one way:
> >
> > where XXXXXXXXXX is the ten-digit voicemail system number for your area and
> > tt is the time in seconds you want the phone to ring for. Valid numbers for
> > tt are 5, 10, 15, 20, 25 and 30. Since each ring is approx. 5 seconds
> > including the blank space between them, that means 30 seconds should give
> > you about 6 rings and that's the maximum you can do.
> >
> > For instance, to set the longest ring delay for the NYC market you would
> > dial:
> >
> > *61*+19084630020*11*30#
> >
> > After pressing the "send/call" button you should get some sort of
> > confirmation message.
> >
> > Note: If you don't know what the voicemail system number for your area is,
> > dial *#61# on your phone.
>
> These have been very helpful, thank you for sharing them.
>
> Is there a location where there I might find more "programming" options like
> these, since I'm assuming that they're all standard with GSM?

http://www.geckobeach.com/cellular [...] mcodes.asp
--
Kevin Michael Vail | a billion stars go spinning through the night,
kevin@vaildc.net | blazing high above your head.
. . . . . . . . . | But _in_ you is the presence that
. . . . . . . . | will be, when all the stars are dead.
. . . . . . . . . | (Rainer Maria Rilke)

Reply to Anonymous
Tom's Hardware > Forum > Mobility Networks > Cingular > Anyone heard of this error message?
Go to:

There are 471 identified and unidentified users. To see the list of identified users, Click here.

Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
They won a badge
Join us in greeting them