I'm about to purchase a Twin Frozr 560 Ti OC and I had few concerns regarding my setup right now.
My current spec is:
E6700 OC'ed at 3.2ghz
P5N-E SLI (running 0401 - 2007 bios, should i update??)
2x2gb ddr2 800 sticks
8800gts 640mb running stock
Antec Basiq 550w (+12V1@22A, +12V2@22A, +12V3@25A) (link to newegg product page)
I will be upgrading to 2500k + P67 board later on this year, but I want to get the the gfx card since its so tempting lol
My concerns are :
1. Will my E6700 will bottleneck the 560 Ti even with OC @ 3.2ghz?
2. Will my PSU's 12v be enough for the 560 Ti AND the OC'ed cpu? Nvidia recommends minimum 30A on single 12v rail
3. Lastly, a minor concern, but should I update my Bios? I'm following the general rule of thumb of "don't update unless if there a problem", and I haven't ran into any problems yet.
Any input would be much appreciated.
My current spec is:
E6700 OC'ed at 3.2ghz
P5N-E SLI (running 0401 - 2007 bios, should i update??)
2x2gb ddr2 800 sticks
8800gts 640mb running stock
Antec Basiq 550w (+12V1@22A, +12V2@22A, +12V3@25A) (link to newegg product page)
I will be upgrading to 2500k + P67 board later on this year, but I want to get the the gfx card since its so tempting lol
My concerns are :
1. Will my E6700 will bottleneck the 560 Ti even with OC @ 3.2ghz?
2. Will my PSU's 12v be enough for the 560 Ti AND the OC'ed cpu? Nvidia recommends minimum 30A on single 12v rail
3. Lastly, a minor concern, but should I update my Bios? I'm following the general rule of thumb of "don't update unless if there a problem", and I haven't ran into any problems yet.
Any input would be much appreciated.