Bezel compensation different monitors

[heely1234567890]

Hello,
I've currently a sapphire Radeon 5830 with two Monitors (one 24" 1920x108 and one 22" 1680x1050) in eyefinity mode. My question is, how can i use them with bezel compensation (CCC) in eyefinity mode? Isn't there any way to do this?

Ps. sry for my bad english

 

[mister g]

Not really, AMD has been trying to change this but it's up to manufacterer's to provide bezel specs so that AMD can implement a system of bezel compensation, which most won't do because of the sheer number of monitor models out there (and the fact that some don't have custom drivers so AMD doesn't even know what's the size of monitor its connected to). So until this changes no there isn't anything you can do.

 

[heely1234567890]

oh what a pity...
I've read somewhere that the CCC looks at the number of pixels.
Therefore, I have connected a second 22 "monitor with 1680x1050 pixel.
But bezel compensation is still not work...

 

[mister g]

http://hardocp.com/article/2010/02/17/amds_ati_catalyst_102_103_preview/2 I think this would help you set op the two 22" monitors, unfortunately compensation doesn't work when resolutions are different from one another, (take 1920x1080 and 1680x1050).

 

[heely1234567890]

I don't know why, but this works either not! Both Displays are 1680x1050

 

[mister g]

Then it must be a feature unique to those with three monitors. Anyway just try not to play too many FPSs as the reticle will screw up since you can't see it.

 

[heely1234567890]

But i ve a friend who has 2 monitors BUT they are exactly the same. Hmm ok but thanks for your help...

 

[heely1234567890]

Oh and his configuration works with bezel compensation

 

[snoogiloo]

Bumping a little old thread but yea..

The reason u cant compensate for the bezels just just coz ur monitors are different size coz CCC looks at the image size section of the EDID. To be able to compensate u will need to EDID flash.

Heres a guide on how to EDID flash http://www.rage3d.com/board/showpost.php?p=1336177078&postcount=88
Note that u will need an older version of Powerstrip (3.83~) and u cant use a 5xxx card while doing it, so u need to use an old graphics card.