Articles & News
Graphics & Displays
Tom's IT Pro
Login | Sign Up
The authority on tech
Will replacement MB recognize RAID 5 array?
Feb 11, 2012, 2:24 PM
Last year I built a system that boots to an SSD, while all of my programs and everything else are mapped to a 3-drive RAID 5 array.
I have now encountered a problem for which I have to replace my motherboard (Gigabye 890FXA-UD5). I've purchased a new one.
My question is: will my RAID 5 be recognized by the new board? If I set SATA mode to RAID, will everything operate as it did before?
Any advice is greatly appreciated. Thanks so much.
Feb 17, 2012
will replacement recognize raid array
Feb 11, 2012, 2:43 PM
(Just to clarify - I'm replacing with another 890FXA-UD5).
Feb 17, 2012, 11:10 PM
Good news - the replacement board, when set to RAID mode, recognized the RAID 5 perfectly.
Can't find your answer ? Ask !
Get the answer
Ask a new question
NAS / RAID
Win7 installation won't recognize raid array
New drives looking to start RAID array
"Future proof" 1+0 RAID array?
Recover a raid array
On-board RAID array degradation
How do you start a raid array
8x 4TB Array -- RAID 5, 6, or 50?
HDD Keeps Disconnecting from RAID 5 Array
Raid 5 Array Initialization?
Raid array not displayed
Moving a RAID 0 Array HOWTO???
Nforce3 setup refuses to aknowledge Raid array... Help!!
Win7 doesn't see RAID array
Can't set up raid array Gigabyte DS3
Problem seeing RAID array after install
Question with RAID 1 array setup.
Will this 4TB RAID 5 array work?
RAID 5 array *extremely* slow and I can't figure out why
Subscribe to our newsletter
icon arrow stem circle
About Tom's Hardware
Licensing and Reprints
Other Shopsavvy sites
© 2017 Purch All Rights Reserved.