Sign in with
Sign up | Sign in
Your question

Gibabyte GA-970A-D3 Post Loop (Bios related)

Last response: in Motherboards
Share
February 17, 2012 9:29:14 PM

Its seems quite a few people are having this same problem with this board and no answers have really been reached in any of those threads. Hopefully with the amount of info I can scrape up we can figure this out here.

Just a few days ago, apon boot, after I get my 1 beep post code telling me all is good. The computer then proceeds to this screen.




Uploaded with ImageShack.us[/URL

The Computer then loops this process.

Now here's what I have tried so far

Tested each of my memory modules in ever slot alone and in pairs.

Resting CMOS by

a) Removing the battery for 1 hour as well as over night
b) Removing the battery and holding in the case power button for 3min to discharge power
c) Removing the battery and touching the 2pin jumper on the MB with a screwdriver as described in the instructions.

Trying to force my back up bios

and lastly, apon boot hiting alt+f12 to copy my main bios to backup.

NONE of this has worked.

SYSTEM INFORMATION

Here is a pic of my bios (after pressing f9)

ImageShack.us

here is a list of my main components



Uploaded with ImageShack.us

On a side note id also like to state that there has been no hardware changes since this Computer has been build. I have not messed with anything BIOS related since I built it a Few months ago.
" target="_blank">

Uploaded with ImageShack.us

here is a list of my main components



Uploaded with ImageShack.us

On a side note id also like to state that there has been no hardware changes since this Computer has been build. I have not messed with anything BIOS related since I built it a Few months ago.
February 23, 2012 5:14:14 PM

shanesilva21 said:
Its seems quite a few people are having this same problem with this board and no answers have really been reached in any of those threads. Hopefully with the amount of info I can scrape up we can figure this out here.

Just a few days ago, apon boot, after I get my 1 beep post code telling me all is good. The computer then proceeds to this screen.


]http://img811.imageshack.us/img811/6180/20120217144549448.jpg

Uploaded with ImageShack.us[/URL

The Computer then loops this process.

Now here's what I have tried so far

Tested each of my memory modules in ever slot alone and in pairs.

Resting CMOS by

a) Removing the battery for 1 hour as well as over night
b) Removing the battery and holding in the case power button for 3min to discharge power
c) Removing the battery and touching the 2pin jumper on the MB with a screwdriver as described in the instructions.

Trying to force my back up bios

and lastly, apon boot hiting alt+f12 to copy my main bios to backup.

NONE of this has worked.

SYSTEM INFORMATION

Here is a pic of my bios (after pressing f9)

http://img607.imageshack.us/img607/5553/20120217145156388.jpgImageShack.us

here is a list of my main components

]http://img694.imageshack.us/img694/584/partslist.png

Uploaded with ImageShack.us

On a side note id also like to state that there has been no hardware changes since this Computer has been build. I have not messed with anything BIOS related since I built it a Few months ago." target="_blank">

Uploaded with ImageShack.us

here is a list of my main components

]http://img694.imageshack.us/img694/584/partslist.png

Uploaded with ImageShack.us

On a side note id also like to state that there has been no hardware changes since this Computer has been build. I have not messed with anything BIOS related since I built it a Few months ago.


have the same exact problem i had to RMA the board and i got my replacement board today a guy at the tech support said with the new board try disabling the Gigabyte Update Manager Utility
m
0
l
February 25, 2012 2:08:26 PM

hey dude i just finished assembling my mother board and it works great again i hope no more trouble in my end
m
0
l
!