Sign in with
Sign up | Sign in
Your question
Solved

Cant connect rosewill blackhawk "power led" to ASUS p9x79 mobo

Tags:
  • Asus
  • Rosewill
  • Connection
  • LED Monitor
  • Power
  • Motherboards
Last response: in Motherboards
Share
February 18, 2012 5:21:15 AM

I have a question about the Rosewill Blackhawk case and its 3 pin "power led" connection from the front of the case. I am supporting an ASUS p9x79 pro mobo and am wondering how to connect it, for that matter if anyone has instructions on connection the front chassis to the this specific mobo.

More about : connect rosewill blackhawk power led asus p9x79 mobo

a b V Motherboard
February 18, 2012 5:53:57 AM

I'd dl the user manual for your mobo.
m
0
l

Best solution

a b V Motherboard
February 18, 2012 6:29:03 AM

The power led is polarity sensitive, +connects to + and - connects to minus. Turn the plug around and try again. These connectors are usually ganged with some othe pin connectors near the front lower edge of the MB. Does the MB have 2 pin connectors for power and reset switches? Did you recieve a pin header to connect the entire MB front panel to the case front panel connectors.
Sounds like a new MB. READ THE MANUAL!
Share
Related resources
a c 207 Ĉ ASUS
a c 717 V Motherboard
February 18, 2012 3:08:06 PM

Most of the time the fans and LED's are powered from a Molex connected to your PSU and the switch works separately from the case headers. Otherwise if you connect an LED fan to the MOBO's headers the LED's are always 'on'.
m
0
l
February 18, 2012 5:59:38 PM

Best answer selected by starquake.
m
0
l
!