/ Sign-up
Your question

Asus P8Z68/Gen3 Deluxe POST Issue

  • Asus
  • Motherboards
Last response: in Motherboards
February 18, 2012 6:41:13 AM

I have an Asus P8Z68/Gen3 Deluxe Motherboard that I am having troubles getting to run. During POST it looks to go through the steps and eventually stops. The Q-code at the time things able to halt is A2 and the BOOT_DEVICE_LED is RED. In addition, I am not able to view anything on the monitor because it does not detect a signal from the PC. Do you have any suggestions what might be causing boot device and the monitor issues?

The configuration for this motherboard is:

ASUS P8Z68/GEN3 Deluxe
CPU INTEL Core i7-2600K Sandy Bridge 3.4GHz (3.8GHz Turbo Boost)
RAM CORSAIR CORSAIR Vengeance 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800)
Power Supply OCZ ZX Series 850W Fully-Modular 80PLUS Gold High Performance
2xHD Seagate Barracuda 1TB 72000rpm
VGA PowerColor ATI X1950XT

More about : asus p8z68 gen3 deluxe post issue

February 19, 2012 12:07:36 AM

Could my issues be from the fact that I am trying to use an ATI X1950XT Viedo Card? Is it compatible with the ASUS P8Z68?